Wholesale e-shop

Protherm HelioSet FES2 250 BM

Code: 0010020615
Brand: PROTHERM
–10 % €2 680 / ks
4 až 7 dní

Detailed information

Product detailed description

Solar set Protherm HelioSet FES2 250 BM
- with 250 l hot water tank
- with 2 vertical collectors
- with accessories for pitched and flat roof mounting

Solar - energy without bills

HelioSet are complete solar systems, which enable the preparation of domestic hot water using solar energy. These systems are designed to work with gas boilers. HelioSet systems are based on unique operating principles - with free flow of solar fluid back into the solar exchanger. The advantage of this solution is a compact system, simplified installation and reliability - there is no danger of overheating of the fluid in summer or freezing of the solar fluid in winter.

Use:

  • Solar system allows the use of solar energy to prepare or preheat domestic hot water. This makes it possible to cover up to 60% of the hot water demand per year (up to 100% in summer) - hot water is prepared for free.
  • HelioSet is a cost-effective solution for smaller installations where the height difference between the bottom of the storage tank and the top of the solar collector does not exceed 8.5 m (with the use of an additional solar fluid pump - up to 12 m).
  • The HelioSet FES2 250 BM system is designed to meet the needs of a larger number of users. The set is designed to work in conjunction with a boiler with a heating-only function, which reheats the solar storage tank in the event of inclement weather or in winter operation.
  • If a heating boiler is not used to reheat the storage tank, it is possible to retrofit an electric heating coil that reheats the solar storage tank in case of bad weather or in winter operation.

Note:
Depending on the type of roofing and the distance between the storage tank and the collectors, you need to order solar collector brackets ( bracket kits are available for different types of coverage and roof types) and solar fluid connecting pipes between the collectors and the storage tank, available in lengths of 10 or 20 m.
Parameters
Description of the SRDV 2.3 vertical solar panel
The solar flat plate collector is covered with structured safety glass, under which is a spiral-shaped absorber tube laser welded to the absorber surface. The entire panel has a frameless design that allows it to be mounted on either a pitched or flat roof using the appropriate mounts for the type of roofing material. Due to the very small volume of solar fluid in the collector, the heat of the solar energy is efficiently and quickly transferred to the solar circuit with subsequent heating of the hot water in the storage tank via the solar exchanger. The high quality insulation of the mineral wool panel also guarantees low heat losses, thus extending the period of use of the solar hot water heating even outside the summer period.
  • Author:
    Milan Žák
    Date:
    10. 8. 2021
    Hello,I want to order a BM 2 solar set for pitched roof , I want to know what exactly is in the delivery of the set and what needs to be reordered . Thank you
  • Author:
    Atria.sk
    Date:
    10. 8. 2021
    Good day, need : https://www.atria.sk/protherm-priechodka-strechou-25-45-oloveny-golier/ https://www.atria.sk/protherm-vaillant-zostava-kominova--60-100-mm/ pipes : https://prnt.sc/1m95fdd and brackets : https://prnt.sc/1m95yg6 Have a nice day.
  • Author:
    Thomas
    Date:
    October 16, 2020
    Hello, we are considering this set up for a new build of approx 200m2 of which approx 130m2 inside(-garage in house and terrace) . The home will be on gas. At this moment I am writing to enquire for 2 adults... Thank you in advance for your reply :)
  • Author:
    Atria.sk
    Date:
    20 Oct 2020
    Hello, yes of course there is no problem with either protherm or hewalex with a 200 l tank for example : https://www.atria.sk/solarna-zostava-hewalex-c-iii-sklon-strechy-od-30/ in a matter of roof pitch. Have a nice day.
  • Author:
    Jaroslav
    Date:
    July 5, 2020
    good day, I would be interested in buying the helioset fes2 250 kit, how is it when we have a heat pump in the home, thank you for the answer
  • Author:
    Atria.sk
    Date:
    July 5, 2020
    Hello, both will work, but not together, regulation cannot be combined. Have a nice day.
  • Author:
    Redai
    Date:
    January 22, 2019
    Good day , please is it possible to connect this kit with protherm 9k electric boiler and get a subsidy for collectors thank you
  • Author:
    Atria.sk
    Date:
    Jan 22, 2019
    Hello, any solar system can be combined with any boiler with a storage tank option, so even with the protherm raja 9K. Unfortunately we do not provide the installation and therefore cannot help you with the subsidy. I will send you more information about the subsidy to the email you have provided. Have a nice day.
  • Author:
    Joseph
    Date:
    October 20, 2017
    Slope of roof is up to 30 degrees and bramac roofing thank you.
  • Author:
    Atria.sk
    Date:
    October 20, 2017
    Hello. You will need a Helioset (we have info from the supplier that there is a new name and also appearance, we have already edited the goods on the website): https://www.atria.sk/protherm-helioset-fes2-250-bm/ You will need this Helioset then you will need brackets at a price of 230 €, incl. VAT a set for pitched roof (roofing beaver, Tendach, Bramac). Then the pipe to the boiler room: > https://www.atria.sk/vykurovacia-technika/solarne-sety-a-kolektory/solarne-dvojrury/ you just need DN16 either 15 or 20 meters and lastly a non-freezing mixture https://www.atria.sk/termsol-nemrznuca-zmes-20-litrova/ You should not need anything else anymore. Is that how you imagine it? If so, I'll send you a straight bill of materials so you have it all in one. Thank you for your reply. Have a nice day.
  • Author:
    Peter
    Date:
    28 Jan 2014
    Hello, are the solar fluid interconnecting pipes between the collectors and the storage tank included in the kit? If not, where can i find them? Thank you
  • Author:
    ATRIA.SK
    Date:
    Jan 29, 2014
    Hello, the interconnecting pipe is never part of the delivery. The piping is of different lengths and diameters. They can be found here https://www.atria.sk/vykurovacia-technika/solarne-sety-a-kolektory/solarne-dvojrury/
  • Author:
    Peter
    Date:
    January 29, 2014
    Thank you, so is it possible to use a stainless steel oven because as I read the manufacturer's recommendation, copper should be used?
  • Author:
    Peter
    Date:
    1 Nov 2013
    Hello,can a solid fuel boiler be connected to this system to heat the DHW in the winter months or is it done purely electronically to run a gas or electric boiler? Thank you
  • Author:
    ATRIA.SK
    Date:
    November 4, 2013
    Hello, it is possible to connect, but you have to sort out the regulation yourself. The connection can be made to the top of the tank, at the point where the gas boiler connects. Have a nice day.
  • Author:
    Marian
    Date:
    April 27, 2013
    Hello, Is it possible to combine this solar with a raja 6Kwh electric boiler? Thank you
  • Author:
    ATRIA.SK
    Date:
    April 27, 2013
    Hello, any solar system can be combined with any boiler with a storage tank connection, so even with a protherm raja.
  • Author:
    vladislav
    Date:
    April 17, 2013
    Hello. I have prewires in my house, copper tubes with insulation and a sensor cable from the basement to the roof, can I use them or do I have to pull a new installation?
  • Author:
    ATRIA.SK
    Date:
    17 April 2013
    Hello, It seems to me that Helioset must have their orginal pipe, better try to reinstall it in Protherm. Have a nice day.
  • Author:
    Tomas
    Date:
    May 30, 2012
    Hello, can this solar kit also be used as a heating support? Thank you for the info.
  • Author:
    ATRIA.SK
    Date:
    May 30, 2012
    Well not exactly, it is only for DHW heating with a 250 litre tank, for heating a huge tank and more collectors would be needed.
  • Author:
    Alojzia
    Date:
    March 31, 2012
    Hello, we are planning to order Protherm Helioset through your shop. Please check if we have selected the right components for the kit. Is the price we have been quoted up to date and correct ? We would like to ask if what we have put in the basket is all that is needed for the proper functioning of the solar system. We are going to connect it to a Protherm Lev 28KKO boiler, which we have already bought. We have a couple of questions: 1- No more connection screws between the collectors are needed, or a relief valve, etc. ? 2- Is there already a temperature sensor that senses the temperature on the collectors ? 3- Is the carrier we put in the basket suitable for Protherm helioset panels when we have a flat roof ? 4- Is Protherm Helioset suitable for flat roofs ? 5- As part of the transport of the UPS, is it ensured that the tank is transported in an upright position ?
  • Author:
    ATRIA.SK
    Date:
    April 2, 2012
    Hello. That attachment you gave so it can't go to Helioset. I enclose the price list. You need a solar flexi pipe from Protherm, then a mounting frame, beam and retract the collectors to the flat roof. The prices are VAT inclusive. Solar kits are always transported on a pallet in a vertical position. The import price is charged at 13 €, incl. VAT. Complete interconnection accessories are included in the package, whether sensor, screws, etc. etc. Anyway, you can see the other solar kits at https://www.atria.sk/solarne-sety-a-kolektory/s-plochymi-kolektormi/
  • Author:
    Alojzia
    Date:
    April 3, 2012
    Hello, we talked to the expert who will be installing our collectors and he said that we don't need the loading hoppers. He said that if the collectors are fixed directly into the roof, there is no need for them. Could you send us a quotation with the complete components on one sheet please? I am confused what we need and what we don't need, so we can show it to the installer. Thank you.
  • Author:
    ATRIA.SK
    Date:
    April 3, 2012
    Hello. Unfortunately I can't send you a quote, it happens to us often that it is used by competitors. The best I can do is this: Here you have the price for the solar set https://www.atria.sk/protherm-helioset-2-250c-vt/ Bracket set, type S (thin roofing) 2x Mounting frame for flat roofs - vertical collector 2x Mounting beam for flat roofs - vertical collector 2x Solar flexi tube 2 in 1, 10 m - 1x Import 13 euro. Again, I remind you that we will send you a confirmation with the price for the solar set and all those items after the order has been placed. If you would like to send an order, please add in the note the reference number of the email: 34201232 so that we can assign this communication to you.
  • Author:
    Miroslav Urbanek
    Date:
    November 2, 2011
    good day,in the future I plan to purchase a complete solar system e.g. Protherm HelioSet 2.250C VT,my question would be whether it is possible to combine this system with the gas boiler buderus logamax U052-24T and whether it is necessary to consider some additional expenses e.g. mounting accessories etc.thank you kindly miroslav
  • Author:
    ATRIA.SK
    Date:
    2. 11. 2011
    Hello, it's possible to combine it and that's how it's most used. But you have to buy a cylinder sensor for a few euros for the Buderus boiler. The temperature setting is then carried out on the cylinder.

Additional parameters

Category: solar sets
Warranty: 2 roky
Weight: 100 kg

Be the first who will post an article to this item!

Do not fill out this field:

O spoločnosti

Spoločnosť Protherm Production patrí do koncernu Vaillant Group a je výrobcom vykurovacej techniky pre mnohé krajiny Európy, Ázie i Afriky. Pre slovenský trh produkuje kotly značiek Vaillant a Protherm. Protherm Production nie je len výrobným závodom. Jeho súčasťou je aj najmodernejšie vývojové centrum, testovacie centrum a distribučno-logistické centrum pre strednú a východnú Európu.

Začiatky spoločnosti siahajú do roku 1991, kedy pôsobila ako predajca vykurovacej techniky v Prahe. Výroba v Skalici bola spustená najprv v spoločnosti Didaktik, odkiaľ bola v roku 1999 presťahovaná do priestorov súčasného závodu. Od roku 2001 sa stala súčasťou nemeckého koncernu Vaillant Group.

Tri slovenské subjekty: Koncern Vaillant Group na Slovensku zamestnáva viac ako 1 800 ľudí. Okrem závodu v Skalici mu patrí aj spoločnosť Vaillant Industrial Slovakia v Trenčianskych Stankovciach, vyrábajúca hydromoduly a rúrky. Predajnou organizáciou pre slovenský trh je spoločnosť Vaillant Group Slovakia, ktorá zabezpečuje i ďalšiu starostlivosť o zákazníka a servis ponúkaných výrobkov.

Koncern Vaillant Group má vyše 140-ročnú históriu a na konte viac ako 2 000 patentov. Je lídrom a priekopníkom v oblasti vykurovacích technológií v Európe. Vo svete má 10 výrobných závodov (osem v Európe, po jednom v Turecku i v Číne) a viac než 12 000 zamestnancov. Vyrába zariadenia značiek Vaillant, Protherm, Saunier Duval, Bulex, AWB, DemirDöküm, Glow-Worm a Hermann.

Míľniky v Protherm Production2017 – Rekord: vyrobených pol milióna produktov za rok 2017

2016 – Otvorenie nového návštevníckeho centra

2015 – Otvorenie nového testovacieho centra

2013 – Vznik centrálneho logistického skladu East Hub

2011 – Odštartovala výroba závesných nekondenzačných kotlov

2005 – Špecializácia na všetky stacionárne kotly

2001 – Začlenenie do nemeckého koncernu Vaillant Group

2000 – Začiatok výroby s tromi montážnymi linkami

Výroba

Spoločnosť Protherm Production vyrába široký sortiment kotlov a zariadení na ohrev teplej vody. Ide o závesné a stacionárne, kondenzačné aj nekondenzačné kotly, elektrokotly, elektrické ohrievače na prípravu teplej vody i vnútorné jednotky tepelných čerpadiel. V závode v Skalici vznikajú produkty značiek:

Začiatok výroby v zrekonštruovaných priestoroch súčasného sídla spoločnosti sa datuje od roku 2000, kedy sa na troch výrobných linkách vyrábalo 51 000 kusov finálnych výrobkov ročne. Postupom času sa výroba kontinuálne rozrastala až do súčasnej podoby. Pribúdali nové projekty a budovali sa nové výrobné linky. V súčasnosti v závode v Skalici vzniká viac ako 710 000 produktov za rok. Široký sortiment zariadení je vyrábaný pre krajiny Európy, Ázie a Afriky. Najviac sa exportuje do Nemecka, Ruska, Belgicka, Turecka, a Talianska.

V Protherm Production sú používané najmodernejšie elektronické pracovné postupy, vďaka ktorým sa vykurovacie zariadenia na linkách montujú pomerne ľahko. Pracovný postup na LCD obrazovkách sprevádza zamestnancov celým procesom montáže, v textovej aj obrazovej forme. Tento inteligentný elektronický systém uľahčuje výrobu a pomáha vyhnúť sa chybám. Pri nesprávnom použití súčiastky nás upozorní a zastaví montáž produktu na linke.

Výrobné haly závodu v Skalici sú svetlé, čisté a nehlučné priestory. Cieľom Protherm Production je stať sa zelenou výrobou, preto investuje nemalé finančné prostriedky do ekologických riešení, inovácií a sústreďuje sa na šetrenie energie.

Vytvořil Shoptet | Design Shoptetak.cz.