Bluetooth USB transmitter + receiver set for STU se610 gateway

Product detailed description

This receiver is universal and works with any door or garage door system.

Simply connect it in parallel according to the manual scheme and the garage door opener system will work with your existing garage door opener control board.

This receiver and USB transmitter can be used for sliding gate operators, swing gate operators, garage door operators. You can easily install the receiver in your gate motor control as the receiver has a very small footprint.

If people drive a car with the USB transmitter connected to the charging port in the vehicle, the gate, the gate will automatically open by approaching the vehicle within 10 meters of the receiver.

The gate, gate closes automatically after entering and then leaving the gate area, if the gate, gate motor has an automatic closing function.

If the gate motor does not have an auto-close function, you can connect a second channel and the door will close after 10 seconds when the power to the USB transmitter is disconnected.

The gate closes automatically if the vehicle with the connected USB transmitter is not within detection distance of the receiver.

Technical parameters:

- Frequency: f 2.4 GH
- Receiver operating voltage: F AC/DC 12-24V
- Receiver operating current: F 18mA ± 2 iDC12V
- USB transmitter operating voltage: F DC5V
- USB transmitter working current: F 1mA ± 0.5
- Code memory: F 340
- Range: F10 m (USB connector in vehicle)
- Receiver dimensions: 50 x 42 x 24 mm