Cyrix-ct 12-24V 120A battery switch KIT

Product detailed description

The Cyrix-ct intelligent battery jumper with thermal protection controls the charging and disconnection of the starting and operating battery, including the jumper cables and accessories.

The Cyrix-ct intelligent battery jumper controls the charging and disconnecting of the starting and operating battery. If a voltage of 13.0 V (26 V) is reached on one of the batteries for 10 minutes or 13.8 V (27.6 V) for 4 seconds, the Cyrix-ct battery interconnects and charging of both batteries occurs simultaneously to full state. As soon as the voltage on one of the batteries drops below 12.8 V (25, 6) for 10 minutes or 11.8 V (23.6) for 4 seconds, the batteries are disconnected from each other. This reconnection and disconnection works both ways. Batteries may be of different capacities, types and designs. It is assumed that each battery powers its own appliances.

The Cyric-ct model is equipped with thermal protection. In the event of high ambient temperature or excessive charging current, it will shut down. As soon as the temperature drops, the Cyric-ct will automatically activate.

The kit includes:
1 x custom Cyrix-ct
1 x 6 metres of red cable with a cross-sectional area of 10 mm2
1 x 0.5 m black cable with cross-sectional area 10 mm2
1 x 0.2 meter black cable with a cross-sectional area of 1.5 mm2 with a mesh with an inner hole diameter of 8 mm and a fastener of 6.3 mm (connecting the 86 output to the Cyrix-ct and the battery)
2 x mesh with inner hole diameter 8 mm with insulation
4 x mesh with 6 mm diameter inner hole with insulation
4 x black pull-tabs

Technical data:
Operating voltage: 12 or 24 V (autodetection)
Maximum alternator current: 150 A
Maximum continuous current in the system: 120 A
Current consumption when the device is not switched on: 4 mA
Connection voltage (with a delay of approx. 10 minutes): 13 V/ 26 V
Connection voltage (with a delay of approx. 4 seconds): 13.8 V/ 27.6 V
Disconnection voltage (with a delay of approx. 10 minutes): 12.8 V/ 25.6 V
Disconnection voltage (with a delay of approx. 4 seconds): 11.8 V/ 23.6 V
Disconnection overvoltage: 16 V (32 V)
Dimensions without pins: 45 x 45 x 45 mm
Housing material: black plastic
Degree of protection: IP54