EMOS GS869 gas detector

Product detailed description

Recognise danger early
Gas is a stealth killer. Its leakage is not easily detectable at first glance and in some cases it is not even felt. Dangerous gases can thus accumulate in a room without anyone noticing.

Protect the health and safety of yourself and your family. Install a GS869 gas detector in your home to provide long-term assurance that your gas appliance has not failed or been turned off.

Gas appliances under control for 5 years
The GS869 gas detector will protect you from the risk of explosion and subsequent fire for 5 years. A simple device that is easy to install in your house or caravan, it will give you the reassurance that all is well with your gas appliances. And you can sleep soundly.

Optical and acoustic alarms
The gas detector is equipped with a loud siren and coloured LEDs. If you want to be absolutely sure that the device is working, you can test the functionality of the alarm at any time by simply pressing the TEST/HUSH button. If all is well, the green LED will light up and the red LED will start flashing. An acoustic signal will also sound.

If the device is not working properly, it will alert you in time by beeping loudly and lighting up the yellow and green LEDs every 30 seconds.

Maintenance-free power supply
The undeniable advantage of the GS869 gas detector is that it simply plugs into the 230 V mains after installation. The device then adapts within 3 minutes and is fully ready for operation. This means that you don't have to worry about regularly replacing the batteries for the next 5 years, as is the case with other types of detectors. You just need to test the functionality of the entire device at the recommended intervals.

Easy installation
The gas detector is designed to be mounted on the wall or freely placed anywhere in the room. A mounting plate is available for easy hanging, which you attach to the wall with screws. The working detector is then simply attached to the mounting plate using the fixing tabs provided. Your GS869 gas detector is then fully ready for use.

Where to place the detector
We recommend installing a gas detector in all rooms where there is a risk of gas leaks. For example, in the kitchen and boiler room. Natural gas is lighter than air and tends to rise and fill any spaces that are above the point of leakage. Therefore, ideally install the detector directly above the likely leak point.

Meets all safety standards
The EMOS GS869 gas detector has been awarded the quality mark by the prestigious British Standards Institution (BSI). This company tests the safety and quality of products from all over the world in its laboratories. When a product passes all the rigorous tests, it is given a unique BSI KM number (in this case KM 642335). You can use this number at any time to verify the authenticity of this international mark.

Technical parameters:

Signalling volume: >85 dB at a distance of 1 m
protection: IPX2D
power supply: 230 V AC
operating temperature: -10 °C to 40 °C
operating humidity: 0-95 %
Installation type: wall-mounted or freestanding
Signalling type: optical and acoustic
service life: 5 years
Dimensions: 36.3 × 117.4 × 77.4 mm