LED strip 12V 5050 60LED/m IP65 max. 12W/m RGB (5m coil) GETI

Product detailed description

LED strip 12V 5050 60LED/m IP65 max. 12W/m RGB (5m coil) Geti
The RGB Led strip is made up of three chips (Red = red, Green = green and Blue = blue) placed in one housing.The resulting colour of the strip is then achieved by combining the different light intensity of the individual RGB chips.

To control the RGB strips and to set the desired color, it is advisable to choose one of the offered RGB controllers, which must be purchased separately for the LED strip function and can be found in the "accessories" section.

RGB tapes can be used both indoors and outdoors. They are mainly used for decorative lighting of flats, bars, staircases, showcases or shop windows, advertising areas, garden houses or as Christmas lighting. With the remote control you can change and regulate the intensity of the lighting according to your mood.
LED strips can be cut into individual modules (3 LEDs each), they can be connected using their respective connectors or by soldering the cables to the strips (the strips must be cleaned of varnish before soldering and also of silicone in the case of soldered strips)
For long life and proper function of LED strips it is recommended to install them in AL profiles, which will ensure heat dissipation and cooling of the strips.

Technical parameters:

- supply voltage: 12V DC
- chip type: 5050
- number of LEDs: 60/m
- power consumption: max. 12 W/m
- colour: RGB
- luminous flux: 12-15 lm/LED
- light dispersion: 120°
- protection rating: IP65 (protected against gushing water)
- dimensions: 10 mm x 5 m
- temperature range: -25° to 85° C
- double-sided 3M adhesive tape on the reverse side - the area must be free of dirt and degreased before application
- the price is for 5 m of tape

For cooling reasons, it is recommended to install the strip in aluminium rails. Installation on other surfaces may cause overheating and damage to the strip and may be considered as damage caused by improper use.

For instructions on how to install the LED strips, please see the downloadable documents below.