Grelne palice in kopalniški radiatorji

Electric spirals, or rods to connect to radiator ladders in bathrooms

Heating coils (rods) are used to electrically heat a ladder radiator. They are inserted directly into the radiator through a special T-piece, which is adapted to the combination of electric coil and conventional heating water. The main advantage of such solutions is the heating of the ladder even when the boiler is not in operation, for example in summer or transitional periods. The electric coils are divided according to power, from 200 W up to 900 W designed for large ladder radiators. It is also possible to connect a socket thermostat (temperature setting device) to the electric coil, which can be used to control either the heating time or, of course, the temperature. For the electric rod, a reduction is also packaged for connection to the ribbed radiator..

 

Spirals without thermostat

 

Spirals with thermostat, white

 

Spirals with thermostat, chrome

 

Spirals with electronic thermostat

 

Spirals with thermostat and cap

Below are the electric spirals without thermostat (temperature setting device), this must be ordered separately and is inserted into the electrical socket, you can set the on and off temperature of the spiral on the display. The advantage of the spirals below is the small size, which does not disturb the design of the radiator.