Soldering / Heat Air Station ATTEN ST-8802

Product detailed description

The ST-8802 2 in 1 service station consists of a hot air station and a soldering station. It represents a very efficient and cost-effective solution. Two channels: soldering section (65 W) and hot air section (800 W), two temperature ranges, large digital LCD display that shows the set temperature and the current status of both channels. It is suitable for soldering and desoldering most types of IO and for repairing printed circuit boards or components. This instrument is used in electronic research, teaching, manufacturing and specially for repairing electronic devices.
Combining two functions in one unit saves space and investment.

The hot air station is great for desoldering sensitive SMD circuits such as QFP, PLCC, SOJ, BGA, CHIP, etc. However, it is also suitable for many other applications where a concentrated stream of hot air is important, such as cleaning 3D printers, hot assembly, heating materials during maintenance or assembly. Suitable for fast and accurate heating or blowing of parts during service interventions, in workshops or service areas where variability and good air and temperature control are required. The temperature can be set on the LCD display, quickly warming up to operating temperature. The amount of air can be infinitely controlled by controlling the diaphragm pump and the four different spikes included. Three programmable quick settings for temperature and air flow - the user can have three combinations ready for different types of work. The handle is equipped with non-slip rubber to offer greater comfort and easy handling. The heat gun handle has a built-in sensor. As soon as you pick it up, it immediately goes into work mode, and as soon as you return it to the holder, it goes into standby mode. The automatic standby function saves energy considerably.

The soldering station is equipped with digital temperature control and a clear display that makes it easy to keep track of both set and actual temperature Thanks to advanced features, LCD display and adjustable temperature, it offers comfort and efficiency for a wide range of electronic work. Microcontroller (MCU) controlled temperature calibration. Buttons (1, 2, 3) to preset or toggle frequently used temperature.
The user can easily change the tips according to the type of solder joint to be soldered, increasing the versatility of the station. The ergonomic soldering handle minimizes fatigue during prolonged use. Interchangeable tips from the T900 series. The soldering station is designed for soldering with adjustable tip temperature from 80°C to 480°C is suitable for fine electronic work - SMD and common pin soldering, board repair, small device servicing, basting and prototyping in the home workshop, at school and for hobby electronic projects.


Product parameters:

Thermal air station:
- Digital display: large clear LCD display, easy temperature/air adjustment.
- Temperature control: the user can precisely set the desired temperature from 100 °C to 500 °C, which is ideal for different types of components.
- Infinitely adjustable hot air quantity
- can be used for blowing and soldering SMD circuits with solder paste
- automatic sleep function is activated when the hot air gun is placed on the stand
- has independent cold air function, can be used for special purposes
- compatibility of interchangeable attachments
- 4 pcs of interchangeable attachments with diameter 3,1 + 6 + 8 + 10 mm ( types: A-2102,A-2104,A-2105,A-2131) for concentrated air jet
- automatic cooling system

Soldering station:
- Digital temperature control with LCD display for clear display of current and set point
- Power input 65 W - ensures fast heating and stable operation
- adjustable temperature range: 80 to 480 °C
- temperature stability: ±2 °C
- Automatic standby and sleep function to protect the heater, save energy and extend tool life
- Temperature lock and password setting to prevent inadvertent changes to settings
- three preset quick temperature selections (buttons "1,2,3") for repetitive settings
- audible alarm function


Technical parameters:

- Dimensions (l x w x h): 210 × 150 × 125 mm
- weight: 3.7 kg

Thermal air station:
- Operating voltage: 220-240 V AC/50 Hz
- power consumption (max.): 800 W
- temperature (min.): 100 °C
- temperature (max.): 500 °C
- temperature accuracy: ±35 °C
- air volume adjustment range: 10% to 100%
- Diaphragm compressor output: 30 to 120 l/min
- three buttons for quick temperature settings that can be set and saved.

Soldering station:
- Power supply: 220 - 240 V AC / 50 Hz
- Power input : 65 W
- Temperature range : 80°C to 480°C
- Handle model : SP-65
- T900 series interchangeable tips