UNI-T UT201R clamp-on multimeter

Product detailed description

UNI-T UT201R clamp-on multimeter
We offer a 3-year warranty on this product. The UT201R digital clamp meter is used to measure AC and DC voltages up to 600V, AC currents up to 400A and fractional voltages up to 600V. On all ranges it has protection against voltages greater than 600V and an audible and optical alarm. Four-way multi-segment display measuring 37 x 25 mm with backlight and fast refresh rate (3 times/s). Jaw opening allows measurement on cables up to 28mm diameter. Non-contact electric field sensing (NCV) allows the detection of live conductors in two sensitivities - EFLo and - EFHi for LV 110V/50/60Hz and 230V/50/60Hz distribution. The included probe - probe spike cover on the test cables allows measurements on CAT III low voltage distribution lines without arc flash hazards. Without the spike covers, the test cables can only be measured on CAT II LV distribution lines. Power supply batteries 2pcs 1,5V R03. Power consumption of the meter is approx. 1.8 mA. The circuit has an automatic power saving function. Sleep mode consumption is <11μA, effectively extending battery life to approx. 400 hours.


Product parameters:

- measurement of voltage, current and frequency of high voltage up to 600 V
- NCV Multi segment display and audible/visual alarm
- protection against voltages greater than 600V across ranges
- automatic range switching
- accuracy is guaranteed within 1% to 100% of the range


Technical parameters:


1. AC current measurement (ranges/roles/accuracy):

4.000 / 0.001 / 50Hz ~ 100Hz ± (4.0% + 10)
40.00 / 0.010 / 50Hz ~ 100Hz ± (2.0% + 10)
400.0 / 0.100 / 50Hz ~ 100Hz ± (2.0% + 10)
- frequency monitoring accuracy for AC current measurement between 50 and 100Hz is ± (1.0% + 5) at 0.1Hz resolution
- overload protection at 420A


2. AC voltage measurement (range/resolution/accuracy):

4.000V / 0.001V / 10Hz ~ 10kHz ± (1.0% + 5)
40.00V / 0.010V / 10Hz ~ 10kHz ± (0.8% + 5)
400.0V / 0.100V / 10Hz ~ 10kHz ± (0.8% + 5)
600.0V/1,000V/10Hz~10kHz ±(0.8%+5)
- frequency monitoring accuracy when measuring AC voltage in the range of 10 to 10k ± (1.0% + 5) at a resolution of 0.01Hz to 0.01kHz
- overload protection at 600Vrms
- input impedance approx. 10MGΩ


3. DC voltage measurement (range/resolution/accuracy):


400.0mV / 0.100mV / ± (0.7% + 3)
4.000V / 0.001V / ± (0.5% + 2)
40.00V / 0.010V / ± (0.7% + 3)
400.0V / 0.100V / ± (0.7% + 3)
600V / 1,000V / ± (0.7% + 3)
- input impedance approx. 10MΩ
- overload protection at 600Vrms


4. Resistance measurement (ranges/resolution/accuracy):

400.0Ω / 0.1Ω / ± (1.0% + 2)
4,000kΩ / 0.001kΩ / ± (0.8% + 2)
40.00kΩ / 0.01kΩ / ± (0.8% + 2)
400.0kΩ / 0.1kΩ / ± (0.8% + 2)
4.000MΩ / 0.001MΩ / ± (2.0% + 5)
40.00MΩ / 0.01MΩ / ± (2.0% + 5)
- overload protection at 600 Vrms


5. Circuit continuity check:

- when the measured resistance is less than 10Ω, the continuous circuit signal will sound a buzzer
- when the measured resistance is greater than 31Ω, the open circuit indication does not sound the buzzer
- open circuit voltage about 2.0V
- measurement from 400Ω range
- overload protection at 600 Vrms


6. Measuring diodes:

- in the pass direction, the voltage drop across the semiconductor junction is less than or equal to 2.0V
- for silicon transition is typical voltage drop of 0.5 to 0.8V
- open circuit voltage about 2.2V
- measurement from 4,000V range


7. Non-contact electric field sensing (NCV):

- allows to detect live conductors in two sensitivities - EFLo and - EFHi for LV 110V/50/60Hz and 230V/50/60Hz.


Other parameters:

- measurement of maximum and minimum values: yes
- data hold (HOLD): yes
- low battery indication: yes
- automatic power off: yes
- 1.5 V battery power supply (R03): 2pcs
- backlight display size: 37 mm x 25 mm
- product dimensions: 215 mm x 63 mm x 36 mm
- net product weight: 248 g
- product colour: red and grey


Contents of the package:

- clamp multimeter UT201R: 1pc
- test cables: 1 pair
- batteries 1.5 V (R03): 2pcs
- instructions for use: 1pc


Wholesale packaging:

- standard quantity per carton: 40pcs
- standard carton dimensions: 485 mm x 295 mm x 385 mm
- standard gross carton weight: 16.6 kg


MANUFACTURER: UNI-TREND
https://www.uni-trend.com/