LED strip 12V 2835 120LED/m IP20 max. 12W/m warm white (coil 20m)

Product detailed description

LED strip 12V 2835 120LED/m IP20 max. 12W/m warm white (coil 20m)
LED strips offer a large number of variations for interior and exterior lighting. They can be used as decorative and furniture lighting, edge lighting for staircases, wall cladding, handrails, line lighting for shelves, display cases or shop windows. They have low power consumption, like LED bulbs they are very durable and long lasting. LED strips are powered by 12V sources. They can be cut into individual modules (3 LEDs each), which can be connected using a coupler or by joining cables (before joining, the surfaces must be cleaned of paint and silicone). You can also use a brightness controller with the strips.

Technical parameters:

- supply voltage: 12V DC
- chip type: 2835
- number of LEDs: 120/m
- power consumption: max. 12 W/m
- colour: warm white (3000-3500 K)
- luminous flux: 9-10 lm/LED
- light dispersion: 120°
- protection: IP20 (not waterproof)
- dimensions: 8 mm x 20 m
- temperature range: -25° to 85° C
- double-sided 3M adhesive tape on the reverse side - the area must be free of dirt and degreased before application
- the price is for 20 m of tape

For cooling reasons, it is recommended to install the strip in aluminium rails. Installation on other surfaces may cause overheating and damage to the strip and may be considered as damage caused by improper use.

Instructions for installing the LED strips can be found in the downloadable documents below