LED strip 12V 3528 120LED/m IP20 max. 9.6W/m neutral white (5m coil) GETI

Product detailed description

LED strip 12V 3528 120LED/m IP20 max. 9.6W/m neutral white (5m coil) Geti
LED strips offer a large number of variations for interior and exterior lighting. They can be used as decorative and furniture lighting, edge lighting for staircases, wall cladding, handrails, line lighting for shelves, display cases or shop windows. They have low power consumption, like LED bulbs they are very durable and long lasting. LED strips are powered by 12V sources. They can be cut into individual modules (3 LEDs each), which can be connected using a coupler or by joining cables (before joining, the surfaces must be cleaned of paint and silicone). You can also use a brightness controller with the strips.

Technical parameters:

- supply voltage: 12V DC
- chip type: 3528
- number of LEDs: 120/m
- power consumption: max. 9.6 W/m
- colour: neutral white (4000-4500 K)
- luminous flux: 6-7 lm/LED
- light dispersion: 120°
- protection: IP20 non-hardened (not waterproof)
- dimensions: 8 mm x 5 m
- temperature range: -25° to 85° C
- double-sided 3M adhesive tape on the reverse side - the area must be free of dirt and degreased before application
- the price is for 5 m of tape
- length of power wires on both sides approx. 10 cm (without connector)
- item replacement 04150767

For cooling reasons, it is recommended to install the strip in aluminium rails. Installation on other surfaces may cause overheating and damage to the strip and may be considered as damage caused by improper use.

For instructions on how to install the LED strips, please see the downloadable documents below.