MOTOR 4TW TESLA 4" M - 1,1kW - 1x230V - double pole DAB.MOTOR 4TW

Product detailed description

Motor 4TW TESLA 4" M - 1,1kW - 1x230V - double pole

The submersible two-pole asynchronous electric motor with mechanical parts is made of AISI 304 stainless steel. The rotor is housed in plain radial bearings, the axial load is captured by a robust plain heel bearing. Lubrication and cooling of the radial bearings and the heel bearing pan is by liquid filling. The stator
is hermetically sealed in a stainless steel housing filled with a mixture of internal argon-based gases. The winding nodes ( with protective conductor) are routed via a tight connection connector through a flat four-core wire above the pump, where a seamless connection of its own supply cable is possible. The start-up capacitor is built into the noryl housing under the motor, so that no start-up box is required for the motor.

- Connection: NEMA 4"
- Insulation Class: F
- Degree of Protection: IP68
- Maximum Immersion Depth: 300 m
- Possible Installation Type:
Vertical or Horizontal
(Horizontal operation 0.5 HP-1.5 HP)