Anti-corrosion spray NANOPROTECH Auto Moto Anticor 75ml

Product detailed description

Anti-corrosion spray NANOPROTECH AUTO MOTO ANTICOR 75 ml
Is your vehicle plagued by rust, salted roads, squeaky hinges or stiff locks? You've just found the perfect product to protect your car, ATV or motorcycle from corrosion, even in extreme conditions. NANOPROTECH Auto Moto Anticor spray can solve all these problems easily. Its special formulation uses nanotechnology and therefore achieves significantly better results than competing products.

How do NANOPROTECH sprays work?

Our sprays use smaller than microscopic particles that, when applied, fill even the smallest cracks, pores and unevenness. This perfectly aligns the treated surface and creates an impenetrable barrier that repels moisture and prevents corrosion. In addition, a thin layer of nanoparticles together with a special solution strongly reduces friction and thus acts as a perfect lubricant. NANOPROTECH Auto Moto Anticor Spray is formulated to withstand even the rapid temperature fluctuations that occur in the engine compartment. In addition, the 300 ml volume variant, officially named GNP Antirust Professional, not only delivers twice the volume, but above all a professional applicator with both short and long application tubes for more practical application.

How can NANOPROTECH Auto Moto Anticor sprays help you?

- Protects against corrosion

Within fifteen minutes after application of the NANOPROTECH Auto Moto Anticor solution, a durable nanoparticle film forms on the treated metal surface. This displaces moisture and, thanks to nanotechnology, prevents corrosion for significantly longer than comparable competitive products.

- Resists salty environments

The most demanding time for cars is undoubtedly the winter season, which is associated with salt on the roads. This can cause significant corrosion problems even on new vehicles over several seasons. However, as long as the parts at risk, particularly on the chassis, are treated with NANOPROTECH Auto Moto Anticor before the winter season, they will remain preserved and will not be damaged by salt.

- Removes rust

If you have an older car or motorcycle that is starting to rust in places, Auto Moto Anticor spray provides the ideal help. Apply the solution to the corroded metal and leave it on for a few dozen minutes, depending on the severity of the corrosion. Meanwhile, a layer of nanoparticles will penetrate the rust onto the metal itself. Then all you have to do is clean the surface with a rag or, in more severe cases, a brush. This removes the corrosion and also prevents it from spreading further.

- lubricate joints

Just a few drops of the nanoparticle solution in the hinges by the door will get rid of the annoying squeak for a long time. The lubricant can be applied to all moving mechanical parts, ensuring their long-term lubrication and preservation..

- Allows seized mechanisms and screws

The solution is characterized by strong buoyancy, and so the tiny nanoparticles can penetrate even very thin gaps. If you need to loosen a stuck bolt, for example, apply a dose of NANOPROTECH Auto Moto Anticor spray and leave it on. After 10-15 minutes, the nanoparticles will penetrate under the head of the bolt, which you can then loosen more easily.

- Protects against freezing

NANOPROTECH sprays retain their unique abilities even in extremely freezing temperatures. The solution can therefore be applied, for example, to a car lock, which then remains movable even in conditions well below freezing. We also recommend applying it to the rubber seals around the doors to prevent them from freezing. Similarly, you can also protect the fuel filler cap and other exposed parts.

Features:

- Acts as corrosion protection
- Withstands temperatures from -80°C to +160°C
- Acts for up to 1 year
- Consumption: approx. 50 ml per 1 m2
- Contents: 75 ml

Where to use the spray?

- Door, boot and bonnet locks
- Rubber sealing of doors and service openings
- Suspension and towing devices
- Bolts, nuts
- Hinges, hinge joints, pins

How to use the spray?

- Spray application should be carried out in a well-ventilated area and preferably with protective gloves.
- Shake the spray carefully before application
- Spray a continuous coat (from a distance of 20-30 cm) on the designated surface or apply the spray directly to the area to be treated (seized screws, etc.)
- Wait 10-15 minutes after application and then wipe off the excess solution.