Anti-corrosion spray NANOPROTECH Electronics Professional 150ml

Product detailed description

Spray anticorrosive NANOPROTECH ELECTRONICS PROFESSIONAL 150 ml
GNP Eletronics Professional protects all sensitive electronics from oxidation, moisture and short circuits. In many cases, it can even rescue drowned electronics and return them to standard functionality. While NANOPROTECH Electric is recommended for the treatment of high voltage electrical equipment, GNP Electronics Professional, on the other hand, is ideal for low voltage electronics. Its great advantage is that the solution is colourless and dries completely after application, so the surface is not greasy and dust does not stick to it. Therefore, it is especially suitable for the treatment of RC models, drones, mobile phones, cameras, e-bikes, e-scooters, PCs, laptops and other low-voltage electronics.

How can GNP Electronics Professional spray help you?
 
Especially when treating sensitive electronics, you will appreciate that the Electronics Professional spray treatment will not stain the treated surface. In addition, the solution dries after application, leaving no greasy spots where dust or other dirt will stick. When water gets into the electronics, irreversible damage can occur. GNP Electronics Professional is the first aid for drowned electronics and also serves as a damage prevention. In the event of drowning, completely shut down and disassemble the equipment. Apply a thin layer of solution directly to the contacts. Wait at least 15 minutes, but 24 hours is recommended. The device can then be folded up and switched on. With older electronics, the contacts often break, most often due to oxidation or the presence of moisture. If you encounter a similar problem, treat the broken contacts with GNP Electronics Professional spray. The nanoparticles will help clean and bond the oxidized contacts, thus extending the life of all electronics.

Suitable for:

- RC models (control units, controllers, servos, connectors)
- Cameras
- Mobile phones
- Electric bikes and scooters
- Batteries and their contacts
- Connectors and contacts of all kinds
- PC, laptops
- And other sensitive electronics

How to properly protect sensitive electronics?

We have written a special article that describes step by step the GNP Electronics Professional application on your mobile phone. GNP Electronics Professional spray will protect all your electronics from water damage. You can use the spray wherever there is a risk of oxidation, where there is a risk of getting wet or if you need to clean electrical contacts. The solution is also colourless and dries completely after application, so the treated surface will not be stained or greasy.

Features:

- Acts as anticorrosive and insulating protection
- Withstands temperatures from -80°C to +160°C
- Acts for up to 1 year
- Consumption: approx. 50 ml per 1 m2
- Contents: 150 ml

How to use the spray?

- Spray application should be carried out in a well-ventilated area and preferably with protective gloves
- Shake the spray carefully before application
- Apply a fine layer (from a distance of 20-30 cm) on the designated surface or apply the spray directly on the treated area
- Wait 10-15 minutes after application and then wipe off the excess solution