CARSPA CFG12/24-10 LiFePO4,PB battery charger

Product detailed description

Automatic charger CFG12/24-10 for Pb and LiFePO4 batteries.
Smart, fully automatic charger for Pb and LiFePO4 batteries with current up to 10A, allowing permanent connection to the battery being charged. It is equipped with a program for regeneration of Pb batteries. 7-stage charging.


Technical parameters:

- input voltage: 100-240VAC, 50-60Hz
- rated power: 12V 10A / 24V 5A
- minimum initial voltage: 7.0 V
- rechargeable batteries: Pb 12 or 24V, LiFePO4 3S-8S, Li-Ion 2S-7S
- battery capacity range: 6-180Ah (12V), 6-90Ah (24V)
- reverse polarity protection
- short circuit protection
- surge protection
- overheating protection
- fan
- thermal protection: 65°C +/- 5°C
- efficiency: app. 85%.
- compliant standards:CB, CE, IEC60335, EN61000, EN55014
- dimensions: (L × W × H): 170 × 100 × 70 mm
- weight: 590 g

Instructions for use:
1) Connect the battery being charged to the charger's supply terminals. This is indicated by an acoustic signal (beep) and the display lighting up. The display indicates the battery terminal voltage.
2) Plug the charger into the mains. Now you have about 10sec to change the charging mode (AGM, CAR, MOTO, LiFePO4, REPAIR) Then the charger will automatically enter the charging phase. The circular indicator shows the phases of the charging cycle, the display shows the clamp voltage, charging current, ambient temperature and charge level.
3) When the desired clamp voltage is reached (for AGM battery the value is 14.4V), the charger switches to float mode with holding voltage (for AGM is 13.5V)