CARSPA CFG12/24-12 LiFePO4,PB battery charger

Product detailed description

Automatic charger CFB12/24-12 for Pb and LiFePO4 batteries
Smart, fully automatic charger for Pb and LiFePO4 batteries with current up to 12A, allowing permanent connection to the battery being charged. It is equipped with a program for regeneration of Pb batteries. 7-stage charging.


Technical parameters:

- input voltage: 100-240 V AC, 50-60 Hz
- rated power: 12V 12A / 24V 6A
- minimum initial voltage: 7.0 V
- rechargeable batteries: 12 V or 24 V Pb, LiFePO4 3S-8S, Li-Ion 2S-7S
- battery capacity range: 6 - 200Ah
- reverse polarity protection
- short circuit protection
- surge protection
- overheating protection
- fan
- thermal protection: 65°C +/- 5°C
- efficiency: app. 85 %
- compliant standards:CB, CE, IEC60335, EN61000, EN55014
- dimensions: (L × W × H): 185 × 1115 × 70 mm
- weight: 700 g

Instructions for use:
1) Connect the charger to the mains voltage and use the MODE button to select the desired charging mode (AGM, CAR, MOTO, LiFePO4, REPAIR) Preset AGM, the last setting remains in the memory of the device even after disconnecting it from the mains
2) Disconnect the unit from the mains and connect the battery being charged to the supply terminals. Step 1 is not necessary if the same type of battery is repeatedly charged
3) Plug the charger into the mains. The charger will start charging automatically. The circular indicator displays the charging cycle phases, clamp voltage, charging current, ambient temperature and charge level
4) When the desired clamp voltage (for AGM 14.4V) is reached, the charger switches to float mode with holding voltage (for AGM 13.5V)