CARSPA EBC2430 24V/30A battery charger

Product detailed description

Intelligent automatic lead-acid battery charger with seven-stage automatic charging, designed to be permanently connected to the battery being charged. Suitable for backup power supplies, caravans, island systems etc. Designed for 24 V 30-100 Ah lead starter and traction batteries with liquid dielectric, AGM and AGM GEL (optional). Dual charging output can charge 2 batteries simultaneously.

Charging phase:

C-1 Desulfurization:
Pulsed current charging. This phase starts automatically when the battery voltage is below 11 V and precedes the standard charging cycle.
C-2 Soft start:
Phase of gradual increase of charging current up to a maximum value of 20 A.
C-3 Constant current charging:
A key phase of the charging cycle. Constant current charging until the clamp voltage reaches 28.4 to 29.6 V (selectable in three phases).
C-4 Absorption charging :
Charging at a constant voltage of 28.4 to 29.6 V while gradually reducing the charging current.
C-5 Battery Test:
During the 90-second test, the battery is discharged while the clamp voltage is measured. If the test is successful, a final, maintenance phase automatically follows. If the test is unsuccessful and the clamp voltage drops rapidly during the test, a 6th stage follows.
C-6 Refresh Charging:
In reconditioning mode, the battery is charged for 4 hours at a reduced constant current.
C-7 Maintenance mode:
Maintaining battery clamp voltage 26.3 - 27.6 V (selectable in three stages).

Specifications:

-Supply voltage 190-265 V
-max. charging current 30A
-for lead starter and traction batteries 24V 50-200Ah, AGM and AGM GEL
-temperature compensation of the charging current using the included temperature sensor
-LED display with indication of charging status, charging current and voltage and charge level
-efficiency 88 %
-Working temperature 0-40 °C
-dimensions 226x175x95mm
-supply includes power and charging cable