Jump Starter CARCLEVER 35814

Product detailed description

The CARCLEVER starter power supply is used for emergency starting of cars, smaller vans, motorcycles, ATVs, lawn mowers, etc.

The starter power supply is connected to the vehicle via clips to the car battery contacts, activation occurs automatically and the readiness to start the vehicle is indicated on the LCD display.

This device is a universal helper when the battery is low in almost all common devices.

The integrated 20,000 mAh battery has enough capacity to charge the device several times or start the car.

You can also use the device as a powerful PowerBank to charge any device via the USB slot.

large clear LCD information display
powerful LED flashlight - illuminating / flashing / SOS
more than 1000 charging cycles

Technical parameters:

powerful built-in LiPO 20.000 mAh / 74 Wh battery
charging time: DC 5 V/hours
dimensions: 228 mm x 97 mm x 46 mm
weight: 735 g
operating temperature range: -20 °C to +60 °C
Outputs:
2x USB 5 V / 2.1 A, 5 V / 9 V / 12 V
12 V, 1500 A (peak 3.000 A), battery clips for car battery for emergency starting
Inputs:
5 V, 2 A / 9 V, 2 A / 12 V 1.5 A (USB-C power connector)

Contents of the package:

PowerBank
clips for connection to the car battery
uSB/USB-C cable

NOTICE:

The USB power cable (USB/connectors) may not be compatible with all devices. In case the supplied cable does not charge, use the original one. Their incompatibility is not a defect of the product, they are supplied with the device free of charge.

If it is not possible to start the vehicle immediately, please wait 1 minute for it to cool down. Do not attempt to start the vehicle more than 3 times without a power source.

Some parts of the vehicle or the starter power supply could be damaged. Before using the starter power, check that the vehicle cannot be switched on for any obvious reason other than a dead battery.

*Technical specifications and pictures are taken from the manufacturer and are for informational purposes only!