Leveling pliers SIXTOL LEVEL SYSTEM PRESS

Product detailed description

Quality LEVEL SYSTEM PRESS levelling pliers for levelling tiles. Laying tiles flush is very easy with LEVEL SYSTEM PRESS pliers - you insert the clips into the joints according to the width of the joint, insert a wedge into the clip and use the special levelling pliers to level the tiles or paving stones. Once the adhesive under the tiles has set, use a rubber mallet to strike off the clips, trim the joints and you're done.

- Easy, fast and precise tiling
- Eliminates height inequalities between tiles, called lippage
- Suitable for tiles of all materials and shapes

Application:
1. During installation, insert clips into the joints between the tiles with a width according to the required joint width.
2. Insert the nails into all the clips.
3. Using the levelling pliers, tighten the first wedge into the clip before the tiles are level.
4. Screw the fixing screw onto the pliers according to the first nail to tighten the rest of the tiles or tiles with the same force.
5. Tighten the rest of the wedges.
6. After the adhesive has set (usually after 24 hours), remove the staples by striking the rubber mallet from the side in the direction of the joint.
Note: The wedges can be used repeatedly.
Note: The joint must be clean for proper removal of staples with a mallet.

Technical parameters:

- Pliers length: 235 mm
- Max. max. opening of the pliers: 70 mm
- Material: handle made of PP + galvanized steel

Contents of the package:
- 1 x Pliers for levelling clamps