Liquid cardboard DEN BRAVEN grey 14kg

Product detailed description

First-class cement waterproofing under tiles. Ideal waterproofing coating for balconies, terraces, loggias, basements, but also for bathrooms, showers and other areas.

The 2K liquid waterproofing board is supplied in a 3:1 ratio (weight ratio dry B and liquid A). The preparation is carried out by mixing the dry component B into the liquid component A, adding water up to a maximum of 5%. Stir by hand or by machine at low speed of approx. 250 rpm until the mixture is well homogenised. When mixing by machine, allow to stand for a short time and then stir from the bottom with a trowel or other tool to release bubbles. Apply to the prepared substrate with a brush or roller, in at least two coats. Apply the layers using the so-called cross method. 1st layer from left to right and 2nd layer from top to bottom (or vice versa). Reinforce corners and corners with expansion tape, which is inserted into the first layer. The base layer must be sufficiently set after approx. 12 hours for masonry, 24 hours under tiles.

Where does it fit?
for interior and exterior
waterproofing of balconies, terraces, loggias, bathrooms and others
insulation against radon
for brick, concrete, plasterboard and other surfaces

How to proceed?
clean the substrate and properly penetrate
mix both ingredients thoroughly in the correct proportions
apply at least two coats to the prepared substrate using a roller or brush
sealing strips or corners are inserted into the live first layer

Where does it excel?
premium waterproofing
resistant to lime and chlorinated water
highly and permanently flexible
insulation against radon
low consumption 1.5 kg/m2 in two coats
also resists water pressure
for horizontal and vertical structures

What to look out for?
properly prepared substrate
not intended as a final finish
must be protected against rapid drying
must not come into direct contact with the metal, the metal must be covered with e.g. Fleeceband

Hazard identification
EUH208 Contains the reaction mixture of 5-chloro-2-methylisothiazol-3(2H)-one [EC No 247-500-7] and 2-methylisothiazol-3(2H)-one [EC No 220-239-6] (3 :1). May cause an allergic reaction. EUH210 Material Safety Data Sheet available on request. The treated article contains CMIT/MIT (3:1), 2,2-dibromo-2-cyanoacetamide, bronopol and 1,2-benzoisothiazol-3(2H)-one.

Technical parameters:

Packing: 14kg
Colour: grey