Multitester - wattmeter V-A-P-F-COSfi meter PZEM022

Product detailed description

Multitester - wattmeter V-A-P-F-COSfi meter PZEM022


Product parameters:

- measurement of electrical parameters (voltage, current, active power, energy, frequency, power factor)
- overload alarm above adjustable threshold - alarm flashing and backlighting
- the measured energy can be reset using the button
- saveable data after shutdown
- all data on LCD backlit display-backlit can be switched off


Technical parameters:

- working and measured voltage: 80~260VAC
- measured current: AC 0-100A/22000W non-contact
- operating frequency: 45-65Hz
- measurement accuracy: grade 1.0
- dimensions: 90×50×20mm


View:

Power
range: 0.2~22000W
<10W display format: 0.00~9.99W
<100W display format: 10.0~99.9W
<1000 WATTS: 100 ~ 999 WATTS
<10000W display format: 1.00~9.90 kW
>10000W display format: 10.0~22.0kW

Energy
range: 0 ~ 999 kWh
<1kWh Display format: 0~999Wh
<10kWh Display format: 1.00~9.99kWh
>10kWh Display format: 10~999kWh

Voltage
range: 80~260VAC
display format: 80~260V

Current
range: 0.001~100AAC
<10A display format: 0.000~9.999A
>10A display format: 10.00~99.99A

Frequency
range: 45~65Hz
display format: 45~65Hz

Power factor
range: 0~1PF
display format: 0.00 ~ 1.00PF


Setting:

Reset energy
- hold the button until the energy value flashes , then release. Press the button briefly to reset the value on the display.

Alarm threshold setting
- hold the button until "SET CLr" appears on the LCD display. Then release.
- the display shows the current alarm value. The last digit starts flashing. The alarm value can be changed by repeatedly pressing the button briefly.
- after the setting is complete, press the save button for 5 seconds. The active energy threshold range is 0.0~2.5kW.


Warning:
- this module is suitable for indoor use only.
- the applied load must not exceed the rated power
- follow the wiring diagram on the back of the product