On-board display 1.88" CARCLEVER SE-145

Product detailed description

the 1.88" on-board display (computer), displays speed, engine speed and other data on a clear colour LCD display while driving.

The display connects only to the OBD diagnostic connector and reads all data from the vehicle's data bus by itself. The speed is read from the GPS or OBD module.

The on-board display can be installed using double-sided cardboard (supplied) on the dashboard or with tape on the window pillar.

Automatic vehicle model adaptation, information is read from the on-board computer via the OBD II or EUOBD connector
High-resolution colour LCD display
multi-colour display for better readability
display shows: speed / engine speed / water temperature / battery voltage / fuel consumption (current / 100 km) / odometer / turbo pressure / travel time / engine error codes
Warning: low battery voltage / high speed / engine speed / high engine temperature
switching between modes: kilometers/miles and Celsius/Fahrenheit (temperature units)
diagnostics and clearing of engine error codes
measurement of vehicle acceleration and deceleration during braking
automatic switching on and off when starting and stopping the engine - effective protection of the car battery (manual switch-on mode is retained with this function)
auto brightness adjustment mode for glare-free driving

Specifications:

supply voltage: 12 V (9 V - 16 V)
power consumption: 400 mA
power consumption at rest: less than 3 mA
Compatible with all OBD2 and EUOBD vehicles
Units: km/mile, can be read from GPS module for speed accuracy
dimensions: 115 mm x 82 mm x 28 mm

NOTE: Due to possible incompatibility with some vehicle models, we recommend testing with the vehicle first and then installing firmly in place. Due to compatibility with most vehicles, not all features of the device may be available on some models!

RECOMMENDATION: IF THE DEVICE IS EQUIPPED WITH A SYSTEM, IT IS NECESSARY TO BE ABLE TO USE IT WHEN NEEDED.