SAFE 10YDCO-PRO carbon monoxide gas detector

Product detailed description

A new generation of carbon monoxide detector with breakthrough CO detection and instant response using a second-generation electrochemical sensor that tests every second for the deadly hazard of carbon monoxide and displays the current concentration level in the monitored area on a colour LCD display.

Power is provided by an integrated lithium battery (built-in, non-replaceable) guaranteeing extremely long operation of the device for more than 10 years and an extended 10-year warranty on both the battery and the device itself. The SAFE 10YDCO - PRO carbon monoxide (CO) detector represents a new level of standard in residential fire safety.
The CO SAFE 10YDCO - PRO detector has a range of innovative features including AI SAFE microprocessor technology to filter out false alarms and measure gas concentration directly in the air in real time.

Unique second-generation electrochemical sensor technology
The second generation electrochemical sensor with de-ionized aqueous electrolyte does not contain ions that could affect the accuracy of the measurement or cause undesirable side reactions. Thus, the SAFE 10YDCO - PRO detector sensor provides reliable and accurate data on the concentration of carbon monoxide in the monitored area and at the same time represents a device with stable performance and a long service life. The second generation sensor of the SAFE 10YDCO - PRO detector has been designed to detect the presence of CO immediately as soon as the gas enters the sensor chamber.
The chamber design with direct link to the AI SAFE microprocessor then offers the most reliable detection method with the ability to recognize false positives and in combination with the prediction algorithm allows the gas concentration to be measured directly in the air and in real time.

Responding only to real threats
For fire detection systems in residential buildings, the priority is to inform people in good time about the real danger. The AI SAFE microprocessor has been developed based on a detailed analysis of the properties of carbon monoxide and works with a predictive algorithm that analyses the data in relation to the actual level of CO in the monitored space, compares the data from the electrochemical sensor and filters out the potential possibility of false alarms in real time to ensure an immediate response to the impending danger in the form of this silent killer.
Carbon monoxide potentially hazardous level alarm
In the event that the CO concentration reaches a certain threshold during detection, the detector will trigger a loud 85 dB alarm signal accompanied by the flashing of a red LED to indicate a carbon monoxide alarm, with the current reading displayed on the detector's blue backlit display.

Environmental display functions
The backlit multi-function LCD display shows the current measured CO concentration in ppm units in alarm mode, while in standby mode it alternates between the current room temperature and humidity information in the monitored space, allowing you to react to dangerously low or high humidity or temperature environmental conditions. The temperature level display can be set based on preference in degrees Celsius (°C) or Fahrenheit (°F).

Unique device design
The combination of battery power and the design of the detector housing allows installation by placing the device in an optimal position on a horizontal surface. As a result, the carbon monoxide detector does not require fixed installation on a wall, but can be variably and freely positioned (stood up) on horizontal surfaces such as shelves, bedside tables, windowsills or other staging areas. The detector's electronic components and circuit board are coated with an insulating and protective layer of IZOVAX nanoparticle varnish to protect the device's electronics even in very humid environments. The device can thus be placed or installed, for example, in bathrooms with karma, gas boilers, boiler rooms, drying rooms, etc.

Memory of the highest measured value
The SAFE 10YDCO - PRO carbon monoxide detector has a memory function for the highest measured value. The memory records information about the highest measured CO concentration even in your absence. By pressing the combined TEST/FORGET button, you can thus recall and display this information on the LCD display, concerning the highest levels of measured values since the last memory reset.

Temporary alarm silencing function
If the detector detects a threshold level of carbon monoxide concentration, it will trigger an alarm to activate the alarm. In the event of an unwanted audible alarm, this can be temporarily silenced by pressing the TEST/SUSPEND button for up to 9 minutes. The temporary silencing mode is signalled by the device with a red LED indicator which flashes 4 times every 5 seconds at a regularly repeating interval without an accompanying acoustic buzzer signaling. If the CO concentration subsequently falls below a predetermined value, the detector automatically switches to its normal operating mode.

Technical parameters:

Sensor technology: electrochemical
Microprocessor: AI SAFE with prediction algorithm
Alarm silencing: manually by pressing the TEST/SUSPEND button
PCB protection: insulating and protective lacquer layer with IZOVAX nanoparticles
Power supply: 3V DC, one lithium battery (integrated for more than 10 years of operation)
Mounting method: on the wall or on a horizontal surface
Signalling: acoustic (85 dB siren) and optical (red, green and yellow LED indicator)
Operating temperature: -10 °C to +55 °C
Operating humidity: up to 95% relative humidity without condensation
Storage conditions:
Temperature: -20 °C - +60 °C
Humidity: 5% - 95% relative humidity without condensation
Dimensions: 133.5 mm × 63.5 mm × 28.9 mm
Weight with batteries: 122 g
Approvals:STN EN 50291-1:2018 and STN EN 50291-1:2018/AC:2021
Marks: CE
Warranty: 10 years (on both device and battery)