TEESA TSA4110 sink mixer with electric water heater

Product detailed description

Teesa instantaneous water heater
The Teesa compact instantaneous water heater, which is installed next to the sink, is the ideal solution for quick access to hot water without complicated installation. Its minimalist design and small size make it ideal for small kitchens, cottages and workshops. Instant water heating guarantees everyday convenience.

Swivel spout
The 120° adjustable spout allows you to freely adjust the direction of the water flow to suit your kitchen tasks. The ball joint allows you to direct the water precisely onto dishes, pots or even when washing vegetables without splashing. This is the ideal solution when working space is limited and maximum control is required.

Easy installation
Installation is quick and requires no plumbing modifications. The water heater can be mounted directly on the worktop or sink, connected to a standard G 1/2" connection and a 220-240 V power supply. This gives you constant access to hot water even in areas without a traditional water heater.

Convenient temperature control
The Teesa water heater is equipped with a practical switch for controlling the hot and cold water flow, which makes setting the optimal temperature quick and intuitive. The LED display on the faucet shows the current temperature, which increases comfort and safety of use while protecting against accidental skin burns.

Power and strength you can rely on
The power of 3000 W ensures instant heating of running water, while the flow rate of up to 2 l/min guarantees comfortable use for everyday activities. The device operates stably at pressures from 0.04 to 0.6 MPa, allowing efficient operation in homes and in places with less stable pressure.

Durability for many years
The heater is made of 304 stainless steel, which guarantees high corrosion resistance and long service life, while the cover guarantees mechanical strength and protection against moisture. Safety is enhanced by the IPX4 rating and overheating protection up to 110 °C.

Countertop / sink mounting
LED display showing temperature
Adjustable discharge angle up to 120°
Nozzle with ball joint for full flow control
Switch controlling hot and cold water flow
Overheating protection (110 °C)

Technical parameters:

Flow rate at (delta t=25 °C): 2 l/min
Flow rate at (delta t=35 °C): 1.3 l/min
Power cable cross-section: 3 x 1.5 mm2
Water connection diameter: G 1/2"
Operating pressure: 0.04 - 0.6 MPa
Output length: 200 mm
Material:
Heating element: stainless steel 304
Cover: ABS
Degree of protection: IPX4
Protection class: I
Rated current: 13.6 A
Rated power: 3000 W
Power supply: 220 - 240 VAC, 50/60 Hz
Weight: 950 g
Dimensions: 285 x 60 x 105 mm