TEROZ 600X antenna amplifier, low noise, UHF, G17dB, F0.7dB, U>120dBμV, F-F

Product detailed description

TEROZ 600X antenna amplifier, low noise, UHF, G17dB, F0.7dB, U>120dBµV, F-F
The Teroz 600X amplifier for the UHF band 470 to 862 MHz is equipped with a miniature microwave amplifier with E-PHEMT (ultra low noise) technology. At the input of the amplifier is a UHF top pass filter that suppresses unwanted signals below the operating band. Practical tests have shown that the amplifier is able to handle antenna signals with a level of around 30dBµV, which is at the noise floor and thus suitable for long-distance reception. This amplifier is of great use in places where there is a very weak useful signal in close proximity to a strong interfering signal, where the signal from the antenna must first be amplified and only then can the interference be detuned. The high build-up capability of this amplifier allows just such use without the danger of waking up a strong signal and degrading the useful signal. In this case, it is recommended to place the amplifier as close as possible to the antenna, since every dB of attenuation of the coaxial cable is added to the amplifier noise.
However, the amplifier is also suitable as a power element for larger TV signal distribution, because it is capable of delivering an undistorted signal with an output level exceeding 120 dBµV!!!! Which is comparable to the values of power amplifiers for STA and TKR, but at an incomparably lower price.

Technical parameters:

- g gain: 17 dB
- noise F: 0.7 to 0.8 dB
- transmitted bandwidth: K21 to K69
- max. output level for 2 TV channels: >120 dBµV
- input and output impedance: 75 Ω
- power supply to output connector: 12V/90mA
- input and output connector: f female
- box dimensions: 24 x 36mm
- weight: 40g
- installation in indoor environments