Hybrid voltage converter CARSPA MKS1000-12, DC/AC 12V/1000W, MPPT regulated

Product detailed description

Product description: hybrid voltage converter CARSPA MKS1000-12, DC/AC 12V/1000W, regul.MPPT
The device is a combination of a pure sine wave inverter, UPS and MPPT controller for solar panels. It is thus a backup power supply with utility grid or generator backup, battery charger and MPPT controller for solar panels, while the backup priority can be set in reverse, i.e. utility grid priority and backup from batteries or PV panels.


Product parameters:

- Pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase island output without overflow (cannot be connected in parallel to DS)
- clear and adjustable LCD display
- selectable operating modes and power priority
- adjustable operating parameters as required
- integrated circuit breaker against short circuit/overload
- protection against overheating, overcharging and over-discharging of the battery
- possibility of using AGM and GEL batteries or LiFePO4 batteries (only for experienced users)
- if solar power is not available, the battery can be automatically recharged from the mains
- audible warning of faulty status and malfunction
- cold start and energy saving mode
- powerful active cooling


Specifications:

- input voltage: 230V AC ±10% 50Hz
- output: 1 phase, 230V AC +- 5%
- rated power of inverter: 1000W / 1000VA
- peak power: 2000VA for 3 seconds
- Switching delay: 10 ms (for PC) - 20 ms (for home appliances)
- Output waveform: pure sinusoid
- battery voltage: 12 V
- maintenance voltage: 13.5 V
- battery protection: <16 V
- Battery type: AGM, GEL, LiFePO4 (optional, must be set)
- max. mains charging current: 40 A
- max. current of MPPT controller: 40 A
- max. panel power: 550 W
- max. solar panel voltage (Voc): 150 V DC
- Operating voltage range of the MPPT controller: 20 - 150 V
- Inverter power priority: solar/UPS/grid battery only
- Charging priority: solar/grid/solar + grid/solar only
- self-consumption: 2 W
- efficiency: 98% (MPPT), 94% (inverter)
- dimensions: 286 x 240 x 91 mm
- operating temperature: 0 to 55 °C
- weight: 3.4 kg
- degree of protection: IP20

Notes:
Output voltage 230 VAC is only available at the output terminal block. The AC OUT socket on the side of the unit is not connected as it does not meet our safety standards.

This product requires professional installation.