Hybrid voltage converter CARSPA MKS4.2K, DC/AC 24V/4200W, reg. MPPT

Product detailed description

Hybrid voltage converter CARSPA MKS4.2K, DC/AC 24V/4200W, reg. MPPT.
The device is a combination of a pure sine wave inverter, UPS and MPPT controller for solar panels. It is thus a backup power supply with utility grid or generator backup, battery charger and MPPT controller for solar panels, while the backup priority can be set in reverse, i.e. utility grid priority and backup from batteries or PV panels.


Technical parameters:

- system voltage 24 V
- inverter with pure sine
- inverter power 4200 W/230 VAC
- max. battery charging current during mains operation 100A
- max. battery charging current during panel operation 100A
- adjustable AC or BAT priority
- Compatible with generator or mains voltages, the inverter is phased with an AC input, allowing the use of three identical inverters with a guard relay to power three-phase systems
- Overload, short circuit and battery discharge protection
- automatic restart after overload
- smart battery charger
- Applicable batteries: AGM lead acid, AGM GEL, liquid dielectric, LiFePO4
- for LiFePO4 it is necessary to set the necessary parameters in USE mode - only for experienced users
- slow start for gradual lowering of the load
- standby power consumption 10 W
- solar panels with max. no-load voltage 90-500 V and max. current 20 A (max. 6200 W)
- Communication RS232+RS485 for battery, wifi module option

Warning:
Parallel or three-phase connection is not possible.
We recommend a minimum voltage of 160 V from photovoltaic panels.

The inverter is designed for use only in TN-S or TN-C-S networks according to the currently valid standards. When used in TN-C networks (two-wire, phase + working earth), there is a risk of damage or malfunction of the equipment.

This product requires professional installation.