PWM solar controller EPever 10A 12/24V with LCD display VS series

Product detailed description

Solar PWM controller EPsolar 10A 12V/24V with display
High quality 10A 12V/24V solar PWM controller with clear built-in LCD display and two USB outputs. Only suitable for panels with approx. 150Wp / 12V battery and 300Wp / 24V battery.

PWM solar controller. Its design is intended for small island solar systems with 12V solar panels (36 cells) for charging a 12V battery, or 24V solar panels (72 cells - two 36-cell panels can be connected in series) for charging a 24V battery and a maximum charging current of up to 10A. The advantage is very simple and easy installation and reliable operation.

The built-in LCD clear display will give you information about the solar panel voltage and current, battery voltage and charging current, as well as the current draw for DC appliances. It also offers statistical information on the total amount of energy produced and consumed.
Using the buttons below the display, you can set one of three types of lead acid batteries: sealed, gel or open liquid battery.

Furthermore, this model newly offers two USB outputs for charging e.g. mobile phones or other portable electronic devices. The maximum USB output current is 2.4A.

We recommend operating with these solar panels from our range:
30Wp / 12V
60Wp / 12V
90Wp / 12V
115Wp / 12V

For more detailed information, please refer to the enclosed brochure and the Czech manual, which will be delivered together with this product.

When installing / wiring, we always proceed by connecting the battery first to the solar controller, the DC appliances second and the solar panel last. After installation, you only need to set the type of battery to be used according to the manual. No further settings are necessary.

It is not possible to connect an external MT50 display and PC interface to the controller. An external battery temperature sensor can be connected.

parameters

- Automatic detection 12V or 24V
- Surge protection.
- Short circuit protection.
- Polarity protection for solar panel and battery connections.
- When the voltage is low, it disconnects the load output.
- Optional external temperature sensor
- Maximum charging and discharging current is 10A
- Dimensions: 142x85x41,5mm
- Weight: 220g.
- Operating temperature: -25°C to +55°C
- Maximum size of connecting cables: 4mm2
- Designed for indoor installations, wall mounting.
- For recharging lead-acid batteries
- Coverage: IP30