STARLUX ST41 PIR Motion Sensor for Ceiling Installation in Drop Ceilings

Product detailed description

STARLUX ST41 PIR Motion Sensor
Motion sensor with light switch in a ceiling-mounted version.
The sensor is equipped with high-sensitivity motion detection circuitry. The device monitors your selected area and if you enter it in the evening
or a person enters at night, the device lights up. As soon as it does not detect the movement of a person, the device will turn itself off after a set time.
The sensor distinguishes between day and night lighting. Easy installation and wide detection range. Also meets hygiene requirements as there is no touching on
switch. It also saves electricity because it only lights up where people are moving (stairwells, hallways, etc.).
Ceiling-mounted infrared motion sensor (PIR ceiling-mounted motion sensor) for suspended ceilings HD-741


Product parameters:

- day and night operation possible
- infinitely adjustable switch-on time
- adjusting the lighting level
- easy installation in the suspended ceiling


Technical parameters:

- operating voltage: 220-240V AC/50 Hz
- Reach - the ideal height is 2.2 to 4 meters above the ground.
- Detection angle (field of view): 360° horizontally
- light level under which the device switches on: approx. 3-2000Lux, infinitely adjustable
. Delay before shutdown after leaving the room: approx. 10 seconds – 7 minutes, continuously adjustable
- Switching load: max. 1200 W (inductive load + 200 W LED)
- Operating temperature: -20 to +40°C
- operating humidity: < 93℅ RH
- Detected movement speed: 0.6–1.5 m/s
- dimensions: 76mm (lens cover diameter), 61.5mm (mounting hole diameter), 75.6mm (depth)
- indoor design, IP20 protection
- design in white