Valves and actuators
Product sorting
List of products
SERVOPOHON 3-POINT MV 120, 230V for mixing 3-4 way valves type ROTOMIX ...
SERVOPOHON 3-POINT MV 120, 24Vfor mixing 3-4 way valves type ROTOMIXTechnical data...
Compact angle ball valve for shutting off hot or cold water supply lines under a...
Angle shut-off valve with a 3/4'' outlet for washing machines, dishwashers or...
Angle ball valve with a ceramic shut-off head, 1/2˝ x 3/8˝ connection, rated to 10...
Angle shut-off valve with a built-in strainer for a 1/2″ hot or cold water line —...
Retail-packed angle valve with filter, 1/2″x3/4″, supplied in a hang-sell blister...
Anti-flood kit PNI SV100 PRO sensor and solenoid valve DN20 3/4, 1.0MPa, IP65
Automatic air vent valve 1/2" with non-return valve, brass Designed for automatic...
Automatic oAirvent valve - hygroscopic, IVAR.HYGRO, dimension: 1/2" PN 10, T =...
Automatic vent valve - 1/2" PN 10, T = +110 °C, max. discharge pressure 2.5 bar...
Automatic vent valve - 3/4" PN 10, T = +110 °C, max. discharge pressure 2.5 bar...
Automatic vent valve - 3/8" PN 10, T = +120 °C, max. drain pressure 2.5 bar...
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
The ball valve is used to close and open the flow of the medium through the pipe.
A brass 1" ball-type bibcock tap combining a compression nut inlet with a hose...
Bibcock ball valve, DN15 (1/2˝), with a compression nut inlet and a hose nipple...
Bibcock ball valve, DN20 (3/4˝), with a compression nut inlet and a hose nipple...
Combined angle valve with a 1/2˝ inlet and two outlets — 3/4˝ for a washing...
