CARCLEVER 35815 PROFI Jump Starter
Code: TI_06447156Product detailed description
The CARCLEVER compressor starter is used for emergency starting of passenger cars, small vans, motorcycles, ATVs, lawn mowers, etc.
The starter power supply is connected to the vehicle using clamps attached to the car battery terminals; activation occurs automatically, and LED indicators signal that the vehicle is ready to start.
This device is a versatile solution for recharging batteries in almost all common devices.
The built-in 16,000 mAh battery has enough capacity to charge the device multiple times or jump-start a vehicle.
Thanks to its compact design and light weight of just 915 g, this power bank is very easy to handle and you can easily take it with you wherever you go.
When using this power supply, you'll appreciate its many practical features, such as the built-in air compressor, flashlight, and the ability to use it as a power bank to charge any device via the USB port.
LED information display
Powerful LED flashlight: steady light / flashing / SOS
more than 1000 charging cycles
Built-in compressor with a capacity of 150 psi
Specifications: Built-in compressor with a capacity of 1.5 L:
powerful built-in LiPO battery, 16,000 mAh / 59.2 Wh
Charging: USB-C
Dimensions: 202 mm x 112 mm x 53 mm
weight: 915 g
Operating temperature range: -20 °C to +60 °C
1x USB 5 V / 2.4 A
12 V / 1000 A (peak 2000 A), car battery clamps for emergency starting
Inputs:
5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A (USB-C power connector)
Compressor:
Inflation range: 150 psi.
Cylinder diameter: 19 mm
Adjustable units: PSI / BAR / KPA / kg/cm³
Compressor pressure range: 0.2 bar – 10 bar (3 psi – 150 psi)
Pressure sensor accuracy: ± 0.15 bar
Compressor type: oil-free
Contents of the package:
1 power bank
1 set of clamps for connecting to a car battery
1 USB/USB-C cable
1 air hose
1x air reducer
1 durable case
NOTES:
The USB power cable (USB connectors) may not be compatible with all devices. If the included cable does not charge the device, use the original cable. Their incompatibility is not a product defect; they are provided with the device free of charge.
If you cannot start the vehicle immediately, wait 1 minute for it to cool down. Do not attempt to start the vehicle without power more than 3 times. Doing so could damage certain parts of the vehicle or the starter’s power supply.
Before using the jump start, check to see if the vehicle can be started for any reason other than a dead battery.
Additional parameters
| Category: | Jump starters |
|---|---|
| EAN: | 8595684130355 |
| EAN: | 8595684130355 |
Discussion
Be the first who will post an article to this item!
