CARCLEVER 35824 PROFI Jump Starter

Product detailed description

The CARCLEVER 12 V / 24 V jump starter is used for emergency starting of passenger cars, vans, small trucks, motorcycles, ATVs, lawn mowers, etc.

The jump starter connects to the vehicle using clamps attached to the car battery terminals; it activates automatically, and the readiness to start the vehicle is indicated on the LED display.

This device is a versatile solution for jump-starting the battery in almost all standard vehicles with a 12-volt or 24-volt electrical system.

The built-in 42,000 mAh battery has enough capacity to charge your device multiple times or jump-start a vehicle.

You can also use the device as a high-capacity power bank to charge any device via the USB port.

Large, easy-to-read LED display
Powerful LED flashlight: steady light / flashing / SOS
more than 1000 charging cycles

Specifications:

High-performance built-in LiPO battery: 42,000 mAh / 155.4 Wh
Charging time: DC 18 V / 2 A / 6–8 hours
Dimensions: 273 mm x 203 mm x 110 mm
weight: 2160 g
Operating temperature range: -20 °C to +60 °C
Outputs:
2x USB 5 V / 2.4 A
12 V, 2000 A (4000 A peak), car battery clamps for emergency starting
Inputs: - battery inputs:
18 V, 2 A (5.5 mm DC connector)

Contents of the package:

Package contents: 1 power bank
1 set of clamps for connecting to a car battery
1 USB/USB-C cable
1x 18 V / 2 A power adapter

NOTES:

The USB power cable (USB/connectors) may not be compatible with all devices! If the included cable does not charge the device, please use the original cable. Their incompatibility is not a product defect; they are provided with the device free of charge.

If you cannot start the vehicle immediately, wait 1 minute for it to cool down. Do not attempt to start the vehicle without power more than 3 times.

This could damage certain parts of the vehicle or the jump-start power source. Before using the jump-start power source, check to see if the vehicle can be started for any reason other than a dead battery.