IVAR.IVN21 - 90° bends MF PRESS

This category includes 90° stainless steel press bends with one socket or plug-in end, designed for use in heating, sanitary, fire sprinkler, and industrial systems. The fittings are suitable for operating pressures up to PN 16 and temperatures ranging from -20°C to +85°C, with a maximum of +120°C. These bends are commonly used in press-fitting systems for gas, water, and inert gases, and are compatible with IVAR stainless steel piping systems.

The fittings are manufactured from 1.4404 (AISI 316L) stainless steel and feature EPDM O-rings for sealing. They are suitable for installation in residential, commercial, and industrial environments where high corrosion resistance and durability are required.

How to choose

Select the correct size based on the nominal diameter (e.g., 15 mm, 18 mm, up to 108 mm) to match the pipe dimensions in your system.
Choose between socket or plug-in ends depending on the installation method and whether the fitting will be inserted into or connected to a pipe end.
Ensure compatibility with IVAR stainless steel pipes and press tools designed for 1.4404 material and EPDM seals.
Verify the operating temperature range (-20°C to +120°C) is suitable for your application.
Confirm the pressure rating (PN 16) meets the system requirements.

Frequently asked questions

Can these bends be used in gas systems?
Yes, the fittings are suitable for inert and non-corrosive gases, including natural gas, provided the system pressure and temperature are within the specified limits.

What is the sealing material used in these bends?
The sealing is provided by an EPDM O-ring, which ensures a tight connection when properly compressed during installation.

Are these bends compatible with other IVAR stainless steel fittings?
Yes, the fittings are designed for use with IVAR stainless steel pipes and press fittings, ensuring system compatibility and uniformity.