IVAR.IVN40, IVN41 - t-pieces

This category includes IVAR.IVN40 and IVN41 90° stainless steel T-pieces designed for use in press-fit pipe systems. These fittings are suitable for heating systems, plumbing, sprinklers, solar installations, industrial gas and compressed air systems. The fittings are made from 1.4404 (AISI 316L) stainless steel with EPDM O-rings and operate within a temperature range of -20°C to +85°C, with a maximum of +120°C. They are available in various reduced configurations with dimensions such as 108-22-108mm, 18-15-18mm and others.

Each T-piece is a press-to-fit component with three press connections, ensuring secure and leak-free joints when properly installed. They are intended for use in press-fitting systems where compatibility with IVAR press tools and dies is essential. The fittings are not watertight unless fully compressed and the seating indicator is engaged up to 54 mm.

How to choose

Select the correct dimensions based on the pipe sizes and flow requirements, such as 108-22-108mm or 18-15-18mm.
Ensure compatibility with IVAR press tools and dies for accurate installation.
Verify the operating temperature range (-20°C to +120°C) matches the system requirements.
Confirm the material (1.4404 stainless steel) is suitable for the intended application, such as corrosive environments or high-purity systems.
Check the PN16 pressure rating is sufficient for the system’s hydraulic conditions.

Frequently asked questions

What is the maximum operating temperature for these T-pieces?
The maximum operating temperature is +120°C, with a standard range of -20°C to +85°C.

Can these T-pieces be used in solar heating systems?
Yes, they are suitable for solar heating systems due to their temperature range and material properties.

What is the material of the sealing O-ring?
The O-ring is made from EPDM, suitable for a wide range of fluids and temperatures.