Multimeter ERMENRICH Zing TC07

Product detailed description

The Ermenrich Zing TC07 digital multimeter with classic rotary switch is designed for measuring DC and AC voltage, DC current and resistance. Its functionality is sufficient to perform most household tasks as well as to perform basic measurements in the work of a professional electrician.

The multimeter uses the True RMS method for calculations, that is, it is able to calculate the effective value of both sinusoidal and non-sinusoidal signals. In this case, the AC voltage measurement is more accurate and precise. There is a continuity test that checks the continuity of the conductor between the two test points of the circuit. Another mode is available for detecting diodes in interrupted or disconnected circuits. A hold function to display the measured value is useful in cases where it is not possible to reach the instrument and read the readings on the display immediately after the measurement has been made. When the button is pressed, the value remains on the display and can be checked later.

The unit is powered by standard batteries and features an auto shut-off function to save battery power.

Manual selection of operating modes and setting of measurement limits
Function of voltmeter, ammeter (DC only) and ohmmeter
True RMS method to ensure high accuracy of measured quantities
Continuity test, diode test, hold function to display the measured value
Power supply using standard batteries

Technical parameters:

Package size (LxWxH): 14x9x4 cm
Shipping weight: 0.21 kg
Measurement limit value selection: manual
DC voltage measurement limit: 200 mV/2 V/20 V/200 V/600 V: error ±(1.0%+5)
AC voltage measurement limit: 2/20/200/600 V: error ±(1.0%+5)
DC current measurement limit: 20 mA/200 mA/10 A: error ±(1.5%+5)
Resistance measurement limit: 200 Ω/2 kΩ/20 kΩ/200 kΩ/2 MΩ/2 MΩ/20 MΩ: error ±(1.2%+5)
Diode test: yes
True RMS measurement method: yes
Measured value display hold function: yes
Overvoltage category: CAT III 600 V
Display: LCD, black and white
Number of views: 2000
Display backlight: yes
Safety standards: EN61010-1,-2-030; EN61010-2-033; EN61326-1
Continuity test: yes
Power: 2 AAA batteries (not included)
Low battery indicator: yes
Automatic shutdown : yes

Contents of the set:

Digital multimeter
Probes
User manual and warranty card