PIR motion sensor GETI GS1206

Product detailed description

Motion sensor with light switch in a ceiling-mounted version.
The sensor is equipped with high-sensitivity motion detection circuitry. The device monitors your selected area and if you enter it in the evening
or a person enters at night, the device lights up. As soon as it does not detect the movement of a person, the device will turn itself off after a set time.
The sensor distinguishes between day and night lighting. Easy installation and wide detection range. Also meets hygiene requirements as there is no touching on
switch. It also saves electricity because it only lights up where people are moving (stairwells, hallways, etc.).


Product parameters:

- day and night operation possible
- infinitely adjustable switch-on time
- adjusting the lighting level
- easy installation in the suspended ceiling

Technical parameters:

- operating voltage: 220-240V AC/50 Hz
- range - ideal height is 2.2 to 4m above the ground.
-detection angle (angle of view): 360° horizontal
- light level under which the device switches on: approx. 3-2000Lux, infinitely adjustable
. time to switch off after leaving the room: approx. 10 seconds - 15 minutes, infinitely adjustable
- switching load max. 1200 W (induction light + LED up to 300 W)
- operating temperature: -20~+40°C
- operating humidity: <93℅ RH
- detected motion speed: 0.6~1.5m/s
- dimensions: 76mm (lens cover diameter), 61.5mm (mounting hole diameter), 75.6mm (depth)
- indoor design, IP20 protection
- design in white