SENCOR SCP 4201GY Induction Cooktop

Product detailed description

SENCOR SCP 4201GY Induction Cooktop
Two-burner induction cooktop

-Simple controls combining a classic rotary knob with a touch panel
-Easy maintenance of a glass-ceramic induction cooktop
-High efficiency, saving time and electricity while cooking
A glass-ceramic induction cooktop remains cool to the touch because the heat is generated directly in the cookware via induction (note: the cooktop may become partially warm from the cookware). Induction cooking saves time (60%) and electricity (50%). It is highly efficient (up to 90%) and results in minimal heat loss. The glass-ceramic surface of the cooktop ensures easy and hygienic maintenance.

Touch controls combined with a traditional rotary knob for adjusting temperature and power.
Microprocessor-based operational control.
Suitable for cookware with diameters ranging from 12 to 26 cm.
Automatic detection of cookware for induction cooking (with a magnetic bottom).
A large, easy-to-read LCD display with red backlighting.
Temperature control up to 240 °C.
10 preset heat settings ranging from 200 to 2000 W.
A sleep timer with a range of 1–180 minutes, adjustable in 1-minute increments.
ON/OFF button to turn the device on or switch it to standby mode.
Non-slip feet.

High level of security:

-Automatic cookware detection and automatic shut-off. The cooktop will turn off if the cookware is removed from the cooking zone or if the cookware used is not suitable for induction cooking. You can easily check if the cookware is suitable by holding a magnet to the bottom of the pot.
-A thermal fuse that protects both the cooktop and the interior of the stove from overheating, with an audible alarm. First, a warning signal sounds, and then the stove automatically shuts off.
-Protection against overvoltage and undervoltage in the electrical grid
-H / C symbol - The letter H (hot) appears when the internal temperature of the cooker exceeds 55 °C. The letter C appears when the internal temperature of the appliance is below 55 °C.

Technical parameters:

- Power consumption: 2000 + 1500 W
- Dimensions (width × depth × height): 580 × 355 × 75 mm
- Weight: 5.24 kg
- Voltage and frequency: 220V–240V ~ 50/60 Hz
- Timer: 1–180 minutes
- Left hotplate: 10 power levels ranging from 200 to 2000 W
- Right hotplate: 10 power levels ranging from 200 to 1500 W
- Temperature settings from 60 to 240 °C
- Controls: a combination of touch controls and a traditional rotary control
- Security: Control panel lock to prevent unauthorized use and changes to settings
- Thermal fuse against overheating