Tinycontrol tcPDU rackmount power distribution module

Product detailed description

Tinycontrol tcPDU rack-mounted power distribution module. Power panel, managed, 7x socket, 1U, 135cm cable, power metering, RJ-45, SNMP, MQTT, RJ-12 (1wire/I2C), 2 digital inputs Controlled power distribution unit for mounting in a standard 19" rack. It is equipped with seven independently controlled sockets connected to 230 V mains voltage. The unit can be managed via the built-in web server or SNMP or MQTT protocol via the physical Ethernet interface. The unit is equipped with a power monitoring system that monitors the current mains voltage, current, active/active power and calculates the energy consumed. It has 2 logic inputs for monitoring e.g. door open status or mains power failure (if UPS is supported). The unit has a separate 10 A automatic circuit breaker for sockets, with remote monitoring and notification in case of disconnection. Other benefits include a Watchdog function that monitors set IP addresses and resets the assigned network outlets in the absence of a ping response. An RJ-12 (1Wire/ I2C) interface for optional sensors (e.g. DS18b20) is also available. - Simple and intuitive management via web page with the possibility to display data of additional optional sensors. - Support for SNMPv2 and v3 with reporting. - MQTT protocol support - connectivity to a free server for data and graphing, control and monitoring in a mobile app. TLS encryption support. - HTTP protocol allows you to send sensor data or status information to the server and control other devices in event management. - The unit allows periodic power on, off or delayed power on to prevent overload. - Two monitoring buses: 1Wire for temperature sensors (support up to 8 sensors) and I2C for humidity and temperature sensors with dew point calculation. - Two logic inputs for connecting two-state sensors, e.g. reed switch monitoring door opening or mains voltage presence sensor. - Protection of output sockets by an automatic 10 A fuse, independent of the electronics supply. In the event of a circuit break, information is displayed on the screen (an alert can also be set). - Monitoring of current, voltage, active/power and 6 fields of energy meters for reading at specified times or hours (e.g. daily reset, separate reading for high and low tariff). - Up to 3 conditions with logic functions can be used in event management to automate tasks - e.g. switching outputs depending on temperature, status of logic inputs and sending messages e.g. power failure. - The scheduler allows you to turn outputs on and off according to a calendar, periodically at selected intervals, and reset or read meters at specified times. - The Watchdog function monitors specific IP addresses and resets outputs if they do not match. Many parameters of the ping command can be configured (e.g., delay time, reset time, etc.). - Email alerts for selected events. - HTTPS support, time settings by NTP server, administrator account and multiple users, backup settings and software updates via web page. Application examples: - Server enclosures - Low power heating control - Power supply for devices requiring remote control - Power for equipment requiring temporary on/off switching Product parameters: - Number of sockets: 7 sockets with protective pin (type E) - Rated voltage: 230 V +/- 10% - Max. power: 2.3 kW (category AC1), 0.75 kW (category AC3) - Current: 10 A - Current consumption monitoring: yes - Interfaces: 1x RJ-45, 1x RJ-12 (I2C/1-Wire), 1x 4pin terminal block - Cable length: 1.35 m - PDU type: controlled - Colour: black - white - Height (U): 1 - Dimensions: 45 x 90 x 440 mm (490 mm with handles) - Weight: 1.80 kg