3D pen BLOW 55-001

Product detailed description

Transparent LED display
On the LED display in our device, you can choose which cartridge you use - PLA or ABS. You can also adjust the melting temperature of the cartridges. This simplification makes using our pen very convenient.

Quick and easy change of operating speed
The slider installed in our device allows you to adjust the filament speed at any time. Thanks to this solution, you will be able to create at your own pace, allowing you to create very precise drawings or figures.

Strong and durable power supply and motor.
Our kit includes a charger for the device (Cube + cable), so you don't have to buy a charger like in other auctions. Our pen has a very powerful motor that allows for long use while ensuring durability.

Technical parameters:

Purpose: three-dimensional shaping
Supported filaments: PLA, ABS / 1.75 mm
Printing range: unlimited
Print speed: adjustable
Temperature: 160 °C - 230 °C, adjustable
Operating voltage: DC 12V/2A
Nozzle diameter: 0.7 mm

The kit includes:

3D pen
13 inserts in 13 different colours, each 5 metres long
3D pen stand
Charger with cable
Operating Instructions

INSTRUCTIONS FOR USE
Plug the power adapter into a power outlet and connect it to the device. The yellow LED light will illuminate, indicating that the device is ready and in standby mode.
Select "PLA" or "ABS" on the LCD to display information according to the material used.
Hold down the filament loading button until the red LED turns blue. This indicates that preheating has been completed and the device is ready for operation.
Insert the filament into the corresponding hole and press the filament insertion button twice. The material is moved by the motor, when the filament starts to come out of the nozzle, it means that it has been inserted correctly. Now, to eject the material, press the filament insertion button.
Start creating! You can adjust the material feed speed with the speed controller.
Fibre made from the same material but in different colours can have different optimum melting temperatures. Therefore, you should use the temperature control buttons to make precise adjustments.
Do not touch the nozzle when the machine is in operation, it is very hot.
If the device is not used for 5 minutes, it will automatically switch to sleep mode. To put them back into operation, press the filament loading button.
To remove the filament, hold down the filament unload button until all the filament is removed from the machine.
When the fun is over, use up the charged filament or remove it.