IVAR.IVN20 GAS - bends 90° FF PRESS GAS

The IVAR.IVN20 GAS category includes 90° press bends designed for gas distribution systems. These bends are manufactured from stainless steel grade 1.4404 (AISI 316L) and feature HNBR yellow sealing O-rings for reliable performance. They are suitable for transporting natural gas, biogas and gaseous propane within operating temperatures of -20°C to +70°C at a nominal pressure of PN 5. The fittings are certified for use in gas systems and include press-to-press connections.

Available sizes range from 18mm to 54mm, with larger sizes up to 108mm available upon request. These bends are intended for use by qualified installers in professional gas distribution applications such as residential and commercial heating systems, and industrial gas supply lines.

How to choose

• Select the correct size based on the pipe diameter required for the gas line (e.g., 18mm, 22mm, 28mm, etc.).
• Ensure the bend is compatible with press fitting systems and has the appropriate thread type for your installation.
• Confirm the material meets the requirements for gas media and operating conditions (-20°C to +70°C).
• Verify the sealing material (HNBR yellow) is suitable for the specific gas type being transported.
• Check for certification compliance (e.g., DVGW) for the intended application.

Frequently asked questions

What gases are these bends approved for?
These bends are approved for natural gas, biogas and gaseous propane.

Can I order larger sizes than those listed?
Yes, press gas fittings in sizes 76.1, 88.9 and 108mm are available upon request.