PNI SVM2000VA servo-motor voltage stabiliser, 2000 VA / 1600 W, 230 V output, terminal connection
Code: PNI-SVM-2KProduct detailed description
The PNI SVM2000VA is a single-phase voltage stabiliser with a servo motor. When the mains voltage fluctuates it automatically brings the output back as close as possible to the preset 230 V, so appliances run under steady conditions. It handles 1600 W (2000 VA) at a current of 7.2 A.
Servo-motor stabilisers work smoothly, without distorting the sine wave, and have a long service life. You can connect an air conditioner, a fridge, a TV, power tools and other household appliances. The coil is made of pure copper, which extends its life and improves efficiency.
The rear panel has a terminal strip with one input and two outputs (L / N / PE). The unit includes an automatic circuit breaker and protects against overload, short circuit, overheating, overvoltage and undervoltage; it also has a start-up delay. Ventilation holes on both sides carry heat away.
Installation
The stabiliser is wired to the mains and to the appliances through the terminal strip – a power cable is not included. Connection to 230 V should be done by a qualified electrician. It measures 235 x 260 x 180 mm and weighs 8.6 kg.
Frequently asked questions
How is it different from a relay stabiliser?
A servo-motor type regulates voltage continuously instead of in steps, which helps where switching steps are a problem.
Is a cable included?
No; choose a cable that suits your wiring.
What if the load is above 1600 W?
The overload protection will cut the output. Choose a larger model.
Technical specifications
| Brand | PNI |
| Manufacturer code | PNI-SVM-2K |
| EAN | 5949066524509 |
| Type | Single-phase servo-motor voltage stabiliser |
| Power | 2000 VA / 1600 W |
| Current | 7.2 A |
| Input voltage | 170–260 V AC, 50/60 Hz |
| Output voltage | 230 V |
| Connection | terminal strip L / N / PE: 1 input, 2 outputs |
| Waveform | sine wave, no distortion |
| Protections | overload, short circuit, overheating, overvoltage, undervoltage, start-up delay, mechanical error |
| Humidity | ≤ 90 % |
| Dimensions | 235 × 260 × 180 mm |
| Package contents | stabiliser, user manual (power cable not included) |
| Weight | 8.56 kg |
| Warranty | 24 months |
| Country of origin | China |
Additional parameters
| Category: | Backup power supplies |
|---|---|
| Warranty: | 2 years |
| Weight: | 8.56 kg |
| EAN: | 5949066524509 |
| Brand: | PNI |
| Manufacturer code: | PNI-SVM-2K |
| EAN: | 5949066524509 |
| Type: | Single-phase servo-motor voltage stabiliser |
| Power: | 2000 VA / 1600 W |
| Current: | 7.2 A |
| Input voltage: | 170–260 V AC, 50/60 Hz |
| Output voltage: | 230 V |
| Connection: | terminal strip L / N / PE: 1 input, 2 outputs |
| Waveform: | sine wave, no distortion |
| Protections: | overload, short circuit, overheating, overvoltage, undervoltage, start-up delay, mechanical error |
| Humidity: | ≤ 90 % |
| Dimensions: | 235 × 260 × 180 mm |
| Package contents: | stabiliser, user manual (power cable not included) |
| Weight: | 8.56 kg |
| Warranty: | 24 months |
| Country of origin: | China |
Discussion
Be the first who will post an article to this item!