Press Tee PEX/PEX/PEX 25x25x25 mm for PEX-AL-PEX Pipe

Product detailed description

The 25 × 25 × 25 mm press tee is used to create a branch on a line made of PEX-AL-PEX multilayer pipe with an outer diameter of 25 mm. All three outlets are the same size, so you can split the main line into two directions without changing the diameter – for example when connecting a bathroom, a kitchen or a utility room from a single distribution line.

The body is made of nickel-plated brass, which is corrosion-resistant and easy to install. The fitting is joined by pressing – once pressed, the joint is firm and permanently tight, with no sealants or additional sealing. The sleeves have inspection holes that let you check during installation that the pipe is inserted all the way to the stop. The manufacturer gives a 10-year warranty on the fitting.

Installation and use

Cut the pipe square, deburr the end and calibrate it with a suitable tool. Then push it into the fitting sleeve all the way to the stop and check its position through the inspection hole. Press the joint with press pliers or a press machine fitted with U-profile jaws for the 25 mm size. A pressed joint cannot be taken apart, so check the direction of the branch and the position of the fitting before pressing.

For the brass fittings of the PEX-AL-PEX system, a hygiene certificate from the national institute of public health (PZH) has been issued for use in drinking water installations. You will find a copy in the related files of the product. Before commissioning, flush the finished installation with a volume of water that completely replaces the water in it.

Frequently asked questions

Which pipe is the tee intended for?
For PEX-AL-PEX multilayer pipe with a diameter of 25 mm. All three outlets of the tee are the same size, 25 mm.

What tools do I need for installation?
Press pliers or a press machine with U-profile jaws for 25 mm, plus a tool for calibrating and deburring the pipe end.

Is the fitting suitable for drinking water systems?
Yes. For the brass fittings of the PEX-AL-PEX system, a PZH hygiene certificate has been issued for use in drinking water installations (valid until 26 March 2029). You will find a copy in the related files.

Can the pressed joint be taken apart later?
No, a pressed joint cannot be taken apart. If the line is modified, the fitting is replaced with a new one.

What is the warranty?
The manufacturer gives a 10-year warranty on the fitting.

Technical parameters