Repeller of bugs and rodents ISOTRONIC M640

Product detailed description

Universal repellent for rodents and other unwanted animals. The device emits high-frequency sounds at 60-second intervals. At the same time, at night and at dusk, it automatically emits a light sequence (flashes several times) that serves as a natural permanent barrier. Animals that are active at night usually avoid this area. The M640 is ideal as a preventive wildlife deterrent to protect gardens and crops or to protect cables in the engine compartment of a vehicle. The device does not require complex wiring as it is battery powered (included). The built-in vibration sensor detects that the engine has been started and automatically shuts off, thus extending the operating time.

The device emits high-frequency sounds at 60-second intervals day and night. These sounds, which are barely audible to the human ear, repel animals and prevent them from becoming accustomed to the sound. In addition, blue light is virtually non-existent in nature (flora and fauna) and signals danger to animals.

Technical parameters:

Battery operation: 6 x AAA batteries (included).
Current consumption: 1 mA, 5 μA in standby mode
Operating area: approx. 40 m² in enclosed rooms
Frequency: approximately 12 to 24 kHz +/- 10
Output frequency: interval of approximately 5 seconds. Frequency range: 0.5 sec on/off and 55 sec off/on. OFF
Switch: ON-OFF
Built-in vibration circuit (the device automatically switches off when the vehicle is started)
Waterproof IP44: Splash proof, device cannot be left in water
In heavy rain, check that the equipment is not wet and dry it if necessary
Operating time with perfect batteries is approximately 12 months
Alkaline batteries are recommended

Note: This device is microprocessor controlled and operates flawlessly up to a supply voltage of approximately 3.9V. If the supply voltage drops to approximately 3.9 V, a continuous beep/continuous pulse tone may sound. If the ultra-high sound is clearly audible or changes to a continuous tone, check the voltage of the inserted batteries and replace them if necessary.