VOLT SOL MPPT 60A 12/24/36/48V Solar Controller

Product detailed description

* Download the app:

Solarlife on the Apple Store for iOS
SolarLifeBT on Google Play for Android
The SOL MPPT 60A solar controller (12-24-36-48V) is designed to charge batteries from a connected set of solar panels. This modern and multifunctional device utilizes the latest and most efficient MPPT charging technology.

By optimizing the charging process, the controller effectively extends battery life compared to standard PWM controllers.

The SOL MPPT 60A model is equipped with a wireless communication feature that enables remote control and monitoring of the controller's operating parameters.

Key Features:

Advanced MPPT (Maximum Power Point Tracking) technology.
Conversion/tracking accuracy > 99.9%
A clear LCD display showing the most important operating parameters
Automatic voltage detection for a connected 12/24 V battery
For use with gel, AGM, lithium, and flooded batteries
All settings for the LiFePO4 battery can only be accessed via the smartphone app.
Temperature sensor with automatic temperature compensation (if the temperature exceeds the set value, the charging current is reduced to lower the temperature)
Four-stage charging: MPPT, BOOST, equalization, float
Multiple control modes for connected loads: always on, dusk to dawn, nighttime, and manual
Control the regulator using a dedicated smartphone app
Fully automatic protection (short circuit, temperature, overload)
When charging batteries using a controller, be sure to select the appropriate battery type in the controller settings.

Failure to use the appropriate battery charging mode may result in premature wear, damage, and voiding of the warranty. In addition, when operating in photovoltaic systems (cyclic battery charging), we recommend using batteries that are best suited for this purpose, such as GEL VPRO SOLAR, DEEP CYCLE VPRO SOLAR, or LiFePO4 lithium batteries.

We do not recommend using maintenance-free AGM batteries (e.g., AGM series, AGM OPTI, AGM VPRO) in photovoltaic systems (cyclic charging). These batteries are designed for and perform best in buffer mode (backup power, UPS systems).

Technical parameters:

Maximum charging current: 60 A
Battery voltage: 12V/24V/36V/48V
Maximum panel voltage: 150 V
Maximum current from the Imp panels: 60A
Power consumption: ≤16 mA (12 V); ≤12 mA (24/36/48 V)
For batteries: AGM, GEL
Input voltage: 14–59.2 V (at 25°C)
Voltage compensation: 14–60 V (at 25°C)
Input voltage: 13–58 V (at 25°C)
Low-voltage receiver cutoff: 10.8–11.8 V / 43.2–47.2 V
Reconnection voltage: 11.4–12.8 V / 45.6–51.2 V
Overvoltage protection: 15.8–62.3 V
Temperature coefficient: -4.17 mV/K per cell (gain, offset) -3.33 mV/K per cell (bias voltage)
Detection voltage for twilight/dawn: 5/10 V
Safety: IP32
Dimensions: 262 x 186 x 97 mm
Weight: 3 kg