Voltage converter FS2000 12V/230V 2000W pure sine wave D.O. wireless

Product detailed description

High-end pure sine wave inverter suitable for appliances with high demands on a pure sine wave supply voltage waveform. When using this inverter, there is no risk of damage to appliances with sensitive electronics such as TV sets, monitors, some coffee machines, chargers, etc. At the same time, thanks to its power, it is suitable for emergency use of any appliance with a high power consumption, such as welders, hand tools, etc. However, high power consumption requires the use of a battery with a capacity of at least 200Ah and sufficiently sized supply wires (for a distance of up to 5m min. 35mm2). The inverter is equipped with a detachable remote control with wireless transmission up to a distance of 5m. The inverter can also be operated without remote control.


Technical parameters:

- rated input voltage: 12 VDC
- allowable input voltage range: 10.5V-15VDC
- rated output voltage: 230VAC + USB 5VDC/2,1A
- permitted load: 2000W permanently, 4000W 3sec., 2500W 3min.
- current draw: 1A at no load, 170A at full load
- efficiency:89~93%
- surge protection: at Uvst<10,5V - alarm, <10V - shutdown
- overvoltage protection: at Uvst>15,5V - shutdown
- thermal protection - against overheating. Automatic reset after cooling.
- overload and short circuit protection at the output
- soft start: 3-5sec
- LCD display showing battery voltage [DCV] [ and instantaneous draw [W] - data is displayed sequentially at a period of about 1s
- safety and EMC: EN62040-2, EN61000-3, IEC61000-4-3, IEC61000-4-6
- insulation resistance: 100Mohm/500V, I/P-O/P
- dimensions: 350×230×105mm / 5,8kg

The remote control disconnects the inverter from operation. The inverter consumption after switching off the DO is approx. 12mA.
The remote control is powered by 2pcs CR2016 batteries (not included)