Voltage stabilizer KEMOT PROavr-15k

Product detailed description

Protect your equipment from power surges
In single-phase mode, each phase can operate independently. Regardless of the network load and output voltage fluctuations, the KEMOT PROavr-15k maintains the voltage at 230 V ±3%, thus ensuring efficient operation of all devices, including those that are sensitive to the quality of the network voltage. The regulation is automatic, ensuring high accuracy of the output voltage. A fault in one phase does not affect the operation of the others.

Three-phase mode
In three-phase mode, maintaining phase balance is critical. The stabilizer monitors and regulates the voltage in each phase to ensure they are consistent with each other. It compensates for input voltages that are too high or low and supplies voltage to the output after stabilization. In this mode, if any phase fails or disconnects, the device activates protection and prevents voltage from being applied to the output, which is indicated by a "PHASE FAILURE" indicator.
How does the KEMOT PROavr-15k voltage regulator work?
The KEMOT voltage regulator is a device designed to maintain a set output voltage of 230 V. Its purpose is to increase or decrease the input voltage that is too low or too high, and to ensure that the output voltage remains within the permitted range, and to prevent energy spikes that could be dangerous for connected equipment. The design of the regulator is based on a toroidal transformer, which ensures stable operation of the device.

Voltage regulator with servomotor
The KEMOT PROavr-15k voltage regulator maintains the voltage with a high accuracy of up to 3%. This high level of accuracy is the result of servo motor based technology.

BYPASS switch
The device is also equipped with a "bypass" function, i.e. a switch that bypasses the operation of the controller, allowing it to be disconnected and seamlessly fed into the home network from an external source.

BACKUP function
If you need a voltage regulator for devices with high inrush currents, choose a model with a delay switch. The KEMOT PROavr-15k model is equipped with a delay switch with a range of 6 to 180 seconds, which reduces the risk of damage to connected equipment at high inrush currents. The KEMOT PROavr-15k is also protected against overvoltage, undervoltage, overload, overheating and short circuit.

Easy transport
To make it easier to move and position the KEMOT stabiliser in the right place, it is equipped with four sturdy castors. These castors allow easy transport of the equipment to different locations, greatly simplifying its operation and maintenance.

Use
The KEMOT PROavr-15k stabilizer is suitable for home and office use. It is ideal for:
television and broadcasting equipment
speakers, mini-systems and other audio/video equipment
household appliances such as induction hobs, microwaves, fridges and freezers etc.
computers, monitors, printers, cash registers and other office equipment
central heating furnaces and pumps
electricity generators

Technical parameters:

Rated power: 15000 VA
Input voltage range: 225 - 450 V
Minimum starting voltage: 225 V
Minimum output voltage: 310 V
Output voltage range: 400 V
Phase: 1 / 3 phases
Stabilisation accuracy: ±3 %
Efficiency: 98 %
Stabilisation control: servomotor
Transformer: toroidal CRGO
Indicator:LCD display
Operating frequency: 50/60 Hz
Start delay switch: 6/180 s
Housing material: steel
Operating temperature: 0 - 40 °C
Relative humidity: 10 - 102 %
Storage temperature: -15 °C - 45 °C
Protection: overload, short circuit, overvoltage/undervoltage, overheating
Cooling start: at 30 % of rated output
Cooling shutdown: at 20% of rated output
Dimensions: 545 x 230 x 397 mm
Weight: 42 kg