CARCLEVER CAR3A rodent repellent for car

Product detailed description

High-end repeller - pest scarer designed for the protection of cars and agricultural machinery. No make-up of special traps, no killing of otherwise useful animals! Save the environment! This device will serve you to environmentally repel bugs from your car, farm machine, garage and boat (chewing through tires and gnawing on cables and plastic parts). This device drives away and repels not only martens (martens, polecats) but also weasels. Built-in two systems for repelling martens and small rodents. The device repels pests both by means of an ultrasonic signal that is aggressive for them, at the same time repels by means of a flashing light and by means of 4 pcs of high-voltage contact plates. If a pest touches one of the high-voltage plates, it will receive an electric shock that will convince it that staying in your car is impossible for it. In addition, it is subjected to an aggressive ultrasonic signal that is as pleasant to it as it is for a person to stay next to a blaring fire siren. The high voltage on the contact pads is not dangerous to humans. The noise (sound) emitted by the device is almost inaudible to the human ear. Every 22 seconds for 22 seconds (intermittent for another 22 seconds) this device emits a very high-pitched tone (with a frequency of 12 - 24 kHz).

It is installed in the engine compartment or in the vehicle's entrance opening. Care shall be taken to ensure that there is as much clearance as possible in the direction of transmission and that the ultrasonic signal covers as large an area as possible in the engine compartment. Ultrasound propagates in a straight line like light, meaning that behind any obstructions the tones will not be active. In EU countries, it is a fundamental requirement that the towing devices are installed so that they can only be switched on when the car engine is switched off, never while the engine is running.

Technical parameters:

- power supply: 12 V DC
- average current consumption 30 mA
- power consumption 0.42 W
- frequency: 12 - 24 kHz
- volume: 85 dB
- broadcast interval: intermittently after 22 s
- high voltage touch pads: 4 pieces (size 80 x 60 mm)
- output high voltage: approx. 400 +/- 50 V
- length of connecting cables: 30 cm
- material: plastic
- beam angle: approx. 140º
- fuse: 1000 mA
- homologation e11