Carspa HS-600-12 industrial power supply - USED switching 12V 600W
Code: ABCT_A500000426Product detailed description
This power supply is fully functional, USED, sold with 6 months warranty. All clean, undamaged, only slightly scratched. Condition is consistent with normal use. Product is sold in original box.
Output parameters:
- DC voltage: 12V
- Voltage deviation:±2%
- Rated current: 50A
- Current range: 0~50A
- Rated power: 600W
- Adjustable DC voltage range: ±10%
Input parameters:
- Voltage range: 90~132VAC/180~264VAC(set by switch), 255~373VDC
- Frequency:47~63Hz
- AC current:12A/115VAC, 6.0A/230VAC
- Efficiency: 82%
- Peak current: cold start current25A/115VAC, 50A/230VAC
- Loss current:< 3.5mA/240VAC
Protection:
- Overload: over105%~135% of rated power
Protection type - rated current limit, automatic restoration after elimination of fault conditions
- Surge:15.6~17.8V
Protection type - hiccup mode, automatic restoration after removal of faulty conditions
- Overheating: ≥55? fan on, ≤50? fan off, ≥85? fan off
Protection type - cut-off output, automatic restoration when the temperature drops
Environment:
- Operating temperature, humidity: -10?~+60?, 20%~90%RH
- Storage temperature, humidity: -20?~+85?, 10%~95%RH non-condensing
- Test vibration: 10~500Hz, 2G 10min/1cuklus, period after 60 minutes, each axis
Security:
- Test voltage: I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
- Insulated resistance: I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC
Meets standards:
- Safety standards: compliantUL1012
- EMC standards: achievesEN55022, CLASS A
Next:
- Dimensions:238*124*65mm (L*W*H)
- Weight/packaging:1.5kg
Remark:
1. All unspecified parameters listed are measured at 230V input, at the same nominal load and 25 ? ambient temperature.
2. Ripple and noise are measured at 20MHz bandwidth using a 12" twisted-wire terminated 0.1uF and 47uF parallel capacitor.
3. Tolerance: includes adjustable tolerance, lead control and load control.
2. Ripple and noise are measured at 20MHz bandwidth using a 12" twisted-wire terminated 0.1uF and 47uF parallel capacitor.
3. Tolerance: includes adjustable tolerance, lead control and load control.
| HS-600W | |||||
| Model | HS-600-12 | HS-600-13.5 | HS-600-15 | HS-600-24 | |
| Retrieved from | DC voltage | 12V | 13.5V | 15V | 24V |
| Voltage deviation | ±2% | ±1% | ±1% | ±1% | |
| Rated current | 50A | 44.5A | 40A | 25A | |
| Current range | 0~50A | 0~44.5A | 0~40A | 0~25A | |
| Rated power | 600W | 600.8W | 600W | 600W | |
| Vibration/Noise(max.) | 150mvp-p | 150mvp-p | 150mvp-p | 180mvp-p | |
| dC voltage regulation | ±10% | ±10% | ±10% | ±10% | |
| Access | Voltage range | 90~132VAC/180~264VAC(switch adjustable), 255~373VDC | |||
| Frequency | 47~63Hz | ||||
| AC current(Typ.) | 12A/115VAC, 6.0A/230VAC | ||||
| Efficiency(Type.) | 82% | 82% | 83% | 84% | |
| Peak current | Cold start 25A/115VAC, 50A/230VAC | ||||
| Consumption on empty | < 3.5mA/240VAC | ||||
| Protection | Overload | above 105%~135% of rated power | |||
| protection type: hiccup mode, automatic recovery after removing the cause of the error condition | |||||
| Surge | 15.6~17.8V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | |
| Protection method: disconnection of O/P, automatic recovery after removing the cause of the error condition | |||||
| Overheating | ≥55? fan on, ≤50? fan off, ≥85? O/P off | ||||
| protection method: O/P disconnection, automatic recovery when temperature drops | |||||
| Surrounding environment | Operating temperature & humidity | -10?~+60?,20%~90%RH | |||
| Storage temperature & humidity | -20?~+85?,10%~95%RH non-shrinking | ||||
| Shock resistance | 10~500Hz, 2G 10min/1cycle, repeated after 60 minutes, each axis | ||||
| Standards | Security | Meets UL1012 | |||
| EMC standard | complies with EN55022, CLASS A | ||||
| Other | Dimensions (LxWxH) | 238*124*65mm | |||
| Weight | 1.5kg | ||||
Additional parameters
| Category: | ABC Tech |
|---|---|
| Weight: | 1.5 kg |
| EAN: | 6970355991626 |
| EAN: | 6970355991626 |
Discussion
Be the first who will post an article to this item!