Pipe fixing clamp IVAR.PPB, 75 mm

Product detailed description

The AVANSA HPW01 pipe fixing clamp is commonly used in residential and commercial floor heating systems. It provides a secure and durable method of attaching pipe loops to thermal insulation panels during the installation of underfloor heating systems. This ensures even heat distribution and prevents pipe displacement during the concrete screed pouring process. The clamp is suitable for use in both new builds and renovation projects where hydronic floor heating is being installed. The installation process typically involves placing the clamps at regular intervals along the insulation panel surface before positioning the pipe loops.

Proper use of this clamp is essential for maintaining the structural integrity of the floor heating system and ensuring optimal thermal performance. It is particularly useful in systems where the pipe loops are laid in a serpentine or meander pattern. The clamp helps to maintain the correct spacing between pipes and ensures that the system remains stable during the curing of the screed or during subsequent finishing works. Installers should ensure that the clamps are evenly distributed and that the pipe loops are correctly aligned before securing them in place.

Technical parameters

Installation and connection

The installation process involves placing the clamps at regular intervals on the insulation panel surface before positioning the pipe loops. The clamps are typically spaced according to the manufacturer's guidelines to ensure even pipe distribution. The pipe is then inserted into the clamp and secured in place. It is important to ensure that the clamp is fully seated and that the pipe is not twisted or kinked during the process. Common installation mistakes include uneven spacing, incorrect positioning, and failure to check for pipe alignment before securing the clamp.

Installers should also ensure that the insulation panel surface is clean and free from debris before placing the clamps. This helps to prevent any damage to the panel or the pipe during installation. The clamp should be pressed firmly into the panel to ensure a secure fit. After securing the pipe, a visual inspection should be carried out to confirm that the clamp is holding the pipe in place and that there are no signs of displacement or misalignment.

Compatibility and accessories

The AVANSA HPW01 is specifically designed for use with thermal insulation panels used in underfloor heating systems. It is compatible with standard pipe diameters used in such systems. When ordering, it is important to ensure that the minimum order quantity of 100 pieces is met, as this is the standard packaging unit. Additional quantities should be ordered in multiples of 100 to ensure consistency in the installation process. No additional accessories are required for the installation of this clamp.

Technical background for designers

The AVANSA HPW01 is designed to provide a secure and stable method of attaching pipe loops to insulation panels. The use of ABS plastic ensures that the clamp is both durable and flexible enough to accommodate minor variations in pipe positioning. The fixed dimension of 75 mm is chosen to match the standard thickness of insulation panels used in underfloor heating systems. This helps to ensure that the pipe loops remain in the correct position during the installation of the screed and during the operation of the system.

The material properties of ABS plastic contribute to the long-term performance of the clamp. It is resistant to thermal expansion and contraction, which helps to prevent the clamp from loosening over time. The design of the clamp also allows for easy installation and ensures that the pipe loops remain evenly spaced, which is essential for achieving uniform heat distribution. The integration of the clamp into the system is a critical step in the installation process, as it directly affects the efficiency and reliability of the floor heating system.

Service and operation

Once installed, the AVANSA HPW01 requires minimal maintenance. The clamp is designed to remain in place for the lifetime of the system and does not require regular inspection or adjustment. However, during the initial phase of system operation, it is advisable to check for any signs of pipe displacement or misalignment. If any issues are detected, the system should be inspected and any necessary adjustments made before the system is put into full operation.

During the operation of the floor heating system, the clamp helps to maintain the correct spacing between the pipes and ensures that the system remains stable. This contributes to the overall efficiency of the system and helps to prevent any potential issues related to uneven heat distribution. The material properties of the clamp also ensure that it remains effective over time, even in the presence of thermal cycling and other environmental factors.

Frequently asked questions

Can the AVANSA HPW01 be used with different types of insulation panels?
The clamp is specifically designed for use with thermal insulation panels used in underfloor heating systems. It is not recommended for use with other types of panels or materials.

Is the AVANSA HPW01 suitable for use with different pipe diameters?
The clamp is compatible with standard pipe diameters used in underfloor heating systems. It is not suitable for use with non-standard or oversized pipes.

What is the minimum order quantity for the AVANSA HPW01?
The minimum order quantity is 100 pieces. Additional quantities must be ordered in multiples of 100 to ensure consistency in the installation process.

Can the AVANSA HPW01 be used in both new and renovation projects?
Yes, the clamp is suitable for use in both new builds and renovation projects where underfloor heating is being installed. It provides a secure and durable method of attaching pipe loops to insulation panels.