Chemical anchor DEBBEX SF VINYLESTER 410ml Foil System
Code: TI_06560866Product detailed description
Professional two-component chemical system for fast and strong anchoring. Ideal if you need to attach heavy elements indoors or outdoors, with the assurance of fast and quality work.
Where does it fit?
for interior and exterior
anchoring in concrete, masonry, brick, stone, etc.
for fixing wooden or steel structures or facade elements
anchoring of sports equipment, scaffolding, railing footings, posts, fences, cable trays, handrails, awnings, gates or staircases in swimming pools or traffic signs
What to look out for?
the hole must be thoroughly cleaned before application
proper mixing of both components (grey colour)
use a mechanical or electric application gun for extrusion
How to anchor?
first drill a hole of the necessary dimensions
clean the bore properly with a brush and pump
using the application gun, push the first approx. 10 cm out of the hole until the anchor is grey in colour
then we apply the material directly into the hole
insert threaded rod or other elements by rotating movement
Where does it excel?
extreme strength of the anchored joint
can also be applied to flooded boreholes
solidifies quickly
reduced odour
resistant to chemicals
Technical parameters:
Volume: 410ml
Type: foil system
Packaging type: cartridge
Colour: grey
Hazard identification
Component A
Signal Word: WARNING
H317 May cause an allergic skin reaction.
H335 May cause respiratory tract irritation.
P101 If medical attention is needed, keep the product packaging or label handy.
P102 Keep out of reach of children.
P271 Use only outdoors or in well-ventilated areas.
P280 Wear protective gloves.
P304+P340 AFTER INHALATION: Move the person to fresh air and keep him in a position to facilitate breathing.
P333+P313 In case of skin irritation or rash: seek medical advice/care.
P362+P364 Remove contaminated clothing and wash before reuse.
P501 Dispose of contents/packaging at hazardous waste collection point.
Component B
Signal Word: WARNING
H317 May cause an allergic skin reaction.
H319 Causes severe eye irritation.
P101 If medical attention is needed, keep the product packaging or label handy.
P102 Keep out of reach of children.
P261 Avoid inhalation of vapours.
P280 Wear protective gloves and goggles/face shield.
P333+P313 In case of skin irritation or rash: seek medical advice/care.
P337+P313 If eye irritation persists: Seek medical advice/care.
P362+P364 Remove contaminated clothing and wash before reuse.
P501 Dispose of contents/packaging at hazardous waste collection point.
Additional parameters
| Category: | Building Chemistry |
|---|---|
| EAN: | 8595100179340 |
| EAN: | 8595100179340 |
Be the first who will post an article to this item!
Add a comment
