Chimney holder OK-50W13 - without drilling

Product detailed description

Chimney mount, socket with reinforced profile. Possibility of mounting large antenna structures or SAT discs to the chimney. No need to drill into the chimney during installation - this does not interfere with the chimney structure. Two 5m long steel strips are included. These strips are used to attach the bracket to the chimney. Fastening the tape. With the tape attached to one end of the holder in this way, pull it through the screw at the other end (making sure to wind at least 30 cm of tape). Only then tighten the nut. Product parameters: Material: metal Assembly: tightening with a screw thread Mast diameter: max. 28-52 mm Length of tape: 2 x 5 m Distance from mast to chimney : 13 cm Surface finish: zinc electroplated Reinforced profile Total weight: 3,0 kg Dimensions (LxWxH): 350x180x30 mm Packaging: in a box